Daitron MFS50-12 Instruction Manual

Prior to Use
・ Please read this instruction manual carefully before using the product.
・ Be sure to use the product as directed in these precautions.
Warning
・ Detach neither remodeling nor the cover of the product.
This product contains components with high voltage or high temperature.
・ To avoid electric shock or burns, do not touch these components.
・ Keep your face and hands away from the activated product.
Unexpected trouble may occur, causing injury.
Caution
・ This power supply unit is intended to be used with general or commonly used
electronic equipment.
・ Do not operate this product in over-charged current or short-circuit
conditions for more than 10 sec.
Such conditions may cause damage and electrical insulation failures.
・ Avoid actions causing shock such as dropping to this product.
1．Terminal description
・ Before connecting the input and the output , make sure that the input is shut off.
・ Please use less than 5A for each output terminal pin.
・ Connect the FG terminal with the earth terminal of the device or the equipment.
・ Please use applicable connectors for each pin.
Also please use suitable crump tool recommended by manufacturer
・ Wire for the output and the input separately. The noise-proof improves.
Pin #
1
CN101 2
3
4
5
CN501
6
7
8
CN502
9
10
3
2
1
Terminal description
L Input Terminal (L)
N Input Terminal (N)
Frame Ground
+ Output Terminal (+)
+ Output Terminal (+)
- Output Terminal (-)
- Output Terminal (-)
+R Remote Control Terminal (+)
-R Remote Control Terminal (-)
Output Voltage Adjustment Potentiometer
MFS50 Series
Misuse may cause electric shock, fire or failure.
Housing
VHR-5N
(Manufacturer:
JST)
VHR-
4N(Manufacturer:
JST)
XHP-2
(Manufacturer:
JST)
10
7
4
8
9
Instruction Manual
Connector
BVH-21T-P1.1
or
SVH-21T-P1.1
BXH-001T-P0.6
or
SXH-001T-P0.6