Rear Panel - Universal Audio Apollo x8p Hardware Manual

Rear Panel

(28) Power Input
The included external power supply connects to this 4-pin locking XLR jack. Apollo x8p
requires 12 volts DC power and draws a maximum of 72 watts (30 watts typical).
To eliminate risk of circuit damage, connect only the factory-supplied power supply. Use
the Power switch on the front panel to power the unit on and off.
Important:
Do not disconnect the power supply while Apollo x8p is in use,
and confirm the Power switch is in the "off" position before connecting or
disconnecting the power supply.
Apollo x8p Hardware Manual
28
ADAT S/MUX
POWER IN
UNIVERSAL AUDIO, INC.
+12VDC 9.0A
Apollo x8p rear panel (digital portion)
3
29 30
75 Ω
TERM
WORD CLOCK
32
24
8 10 11
31 33
L LINE OUT 1-8 (ALT SURROUND)
MONITOR
R
Rear Panel
14
34
LINE IN 1-8
35