Coopers 10460 Instructions For Use

100 LED Solar Lights
Please read and retain these instructions for future reference
This product consists of a solar cell, rechargeable battery and LED light. During the day, sunlight charges the
battery. At night, the energy stored in the battery is used to power the light. No other power or connections
are required. The length of time the light will stay on for depends on how much sunlight has been received
during the day.
The solar panel should be located where sunlight can fall directly on it – avoid shadows from buildings, trees,
walls, hedges and similar objects, as these will reduce performance.
Please read and follow all instructions before operating your lights. Save this manual for future reference.

BEFORE FIRST USE

• To maximize battery capacity, the solar light should be fully charged by sunlight for 24-28 hours before use.
• Do not place the solar panel near lit objects such
as street lamps, because at night the device may
mistake lit objects for daytime and may not turn
on properly.

PARTS LIST

➀ 1 x electronic control box with LED strand
➁ 1 x ground tube
➂ 1 x pointed ground stake

OPERATION

• Choose a location where the ground is soft.
• Secure the solar panel to the tube; attach the spike to the end of the tube.
• Push the spike containing the solar panel securely into the ground.
• Adjust the angle of the solar panel so it directly faces the sun.
10460
Instructions for Use
v001:13/07/16