Harry Levy MELODY MOUSE Operator Instructions Manual

":?f!:j/!f;J!!f[i}~fllfA{~~~l!#!rf~tfi~~,'.
4uIj ~l2vlj
f}mUjf2mf2nt f!o.nt'lacto'l~td.
Units 1 - 4 Patricia Way, Pysons Road Industrial Estate
Broadstairs, Kent CT10 2LF England
"Telephone: (0843) 866464 Fax: (0843) 860144
MELODY
MOUSE
OPERATORS INSTRUCTIONS
For Version MMOUSE V25.11
Issued 8 July 1994
Remove any transit packing materials from the machine then site t~e
MELODY MOUSE on a smooth level floor.
Handle the machine with care. DO NOT subject it to shocks or damp.
DO NOT drop.
Ensure that ventilation holes or grill have at least 100mm
of clearance to allow free air flow for cooling.
(4")
Connect to the mains supply by fitting a suitable plug to the
machines bottom entry mains lead. The plug is to be fitted with a
5 Amp fuse. All wiring is to be carried out by a qualified
electrician.
Importanr - This machine must be grounded (earthed).
Mains Wiring
Brown
Blue
Green/yellow
Hot (live)
Neutral
Earth
As the colours of the wires in the mains lead of this appliance may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows;
The wire which is coloured green and yellow must be connected to
the terminal in the plug which is marked with the letter E or by
the earth symbol, or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N (Neutral).
The wire which is coloured brown must be connected to the terminal
which is marked with the letter L (Live or HOT).
Route the lead safely to a supply socket.
The MELODY MOUSE is designed for indoor use only, do not expose to
the weather.
Melody Mouse
page 1
Directors.H. J. LEVY. R. POVEY, P MARTIN, Secretary P. MARTIN.
Registered rn England No 1788744.
VAT. Reg. No. 397 8743 76
BACTA
MEMBER