Advertisement
INSTRUCTIONS:
INCLUDING CARE AND USE FOR DUAL MANUAL APPLICATORS
COX NORTH AMERICA, INC.
e-mail:
For all service, parts and warranty repairs call
PC COX (NEWBURY) LIMITED
DISTRIBUTED BY:
8181 COLEMAN ROAD
HASLETT MI 48840
800-822-8114
517-339-3330
FAX: 517-339-3806
www.cox-applicators.com
service@cox-applicators.com
MANUFACTURED BY:
ENGLAND
800-822-8114
Advertisement
Table of Contents
Summary of Contents for COX M300XL
- Page 1 INSTRUCTIONS: INCLUDING CARE AND USE FOR DUAL MANUAL APPLICATORS DISTRIBUTED BY: COX NORTH AMERICA, INC. 8181 COLEMAN ROAD HASLETT MI 48840 800-822-8114 517-339-3330 FAX: 517-339-3806 www.cox-applicators.com e-mail: service@cox-applicators.com 800-822-8114 For all service, parts and warranty repairs call MANUFACTURED BY: PC COX (NEWBURY) LIMITED...
- Page 2 OPERATING INSTRUCTIONS / MANUAL APPLICATORS CARTRIDGE LOADING Depress the release plate and fully retract the rods Fit back of cartridge on black plastic locating discs and push firmly. Locate the front end of the cartridge in the gun. DISPENSING Always use full trigger pulls. To stop any product flow on, depress the release plate when dispensing is finished.
- Page 3 CARTRIDGE LOADING Two Component Applicators with cartridge locators 1. Depress the release plate and fully retract the rods. 2. Locate rear of cartridge over plungers and onto cartridge locators. 3. Push back firmly until the front of the cartridge can be located into the frame assembly.
Need help?
Do you have a question about the M300XL and is the answer not in the manual?
Questions and answers