Epson EB-485Wi Installation Manual page 21

(4) Drill holes of the following diameters and depths.
Drill diameter
Pilot hole depth
Anchor hole depth
(5) Remove the template sheet.
(6) Use a device such as a dust pump to clean out concrete dust from the hole.
(7) Position the wall plate on the wall and insert M8 x 50 mm expansion anchors into the holes.
Attach the nut and tap it with a hammer until the core touches the top of the anchor.
(8) Tighten the nut with a spanner to secure the wall plate to the wall.
8.5 mm
40 mm
35mm
21