TKT 5 Tier Heavy Duty Chipboard Shelving Assembly Instructions Manual

5 TIER HEAVY DUTY CHIPBOARD SHELVING
Assembly instructions

DESCRIPTION OF SIGNAL WORDS

The arrows indicate work steps you have to take.
5 Tier Heavy Duty Chipboard Shelving

Introduction

Congratulations on the purchase of your new
shelving unit. You have purchased a high-quality
shelving unit. Please familiarize yourself with the
shelving unit before assembling it. Read and follow these
assembly instructions and the safety messages. Only use
the shelving unit as specified and for the indicated pur-
poses. Keep these assembly instructions in a safe loca-
tion. If you pass the shelving unit on to others, always
include these assembly instructions.

Intended Use

The shelving unit is intended for storage. The shelving
unit is only intended for private indoor use. Use only the
enclosed mounting hardware and never modify the shelv-
ing unit since this can result in injuries and / or damage the
shelving unit. The manufacturer assumes no liability for in-
juries and damage due to improper use. The shelving unit
is not intended for commercial use.
Never leave children unattended! The shelving
unit is not intended for climbing or playing! Do not allow
people, especially children, to climb on or lean against
the shelving unit. This may result in death, injuries
and / or damage.
AFTER SALES SUPPORT
Model: 5 Tier Heavy Duty Chipboard Shelving
WARNING indicates a hazardous
situation that, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous
situation that, if not avoided, could
result in minor or moderate injury.
NOTICE indicates information
considered important, but not
hazard related (e.g. messages
related to property damage).
Contents / Parts Description
8 x Upright
1
10 x Cross piece (35.59 inch x 20.67 inch/
2
904 mm x 52.5 mm)
10 x Cross piece (17.48 inch x 20.67 inch/
3
444 mm x 52.5 mm)
8 x Connector piece
4
8 x End cap
5
5 x Shelf
6
2 x Countersunk head screw (6 x 1.97 inch/6 x 50 mm)
7
2 x Plain washer
8
2 x Dowel
9
9 8 7
6
Dimensions / Material
The heavy duty shelving unit can be assembled
vertically or horizontally.
Vertical Assembly: 36.22 x 70.86 x 18.11 inch /
92 x 180 x 46 cm
Horizontal
assembly: 70.86 x 36.22 x 18.11 inch /
180 x 92 x 46 cm
Material:
Shelves: wood
Braces, connectors,
crossbars: metal
305 704 3882
01 / 17
1 2 2
5 4
www.tkt-usa.com
3
3