Download Print this page

Kallista P73064 Installation Instructions Manual page 3

Wooden vanity & pre-cut marble top

Advertisement

INSTALLATION INSTRUCTIONS
2x6 Backing Material
 Measure and mark 36-1/4" (921 mm) up from the fl oor. This will be the height from the top of the 2x6
backing material to the fl oor.
 Secure the 2x6 backing material to the studs with framing nails.
 Install the water supply and drain lines. The water supply nipples must extend at least 3" (76 mm) beyond
the fi nished wall material.
 Complete the fi nished wall. Make sure that the fi nished wall is straight and plumb, and that the fl oor is fl at
and perpendicular to the fi nished wall.
IMPORTANT! Do not install any moldings that may inhibit the vanity from being plumb against the fi nished
wall.
1147083-2-B
3 of 6
Wooden Vanity & Pre-Cut Marble Top
1. ALL PREPARATION
36-1/4"
(921 mm)
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4KALLISTA (1-888-452-5547) or FAX 1-888-272-3094.

Advertisement

loading

This manual is also suitable for:

P73065