FS MS 30-084-006-63 Instruction Manual

THIS INSTRUCTION MANUAL CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
THIS INSTRUCTION MANUAL IS PRINTED ON RECYCLED PAPER
USING EARTH FRIENDLY SOY BASED INK.
ITEM:
MS 30-084-006-63
UPC# 049696121323
3-DRAWER CART
Do not return to the store
STOP
Do you have any questions? Missing small parts or hardware?
If you need assistance with the assembly of your 3-DRAWER
CART please e-mail our Customer Service Department at:
support@fourstari.com or call us at 1-800-639-3803
Please let customer service know:
1. You purchased this item from Wal-Mart
2. The item description is: 3-DRAWER CART
3. The item number is MS 30-084-006-63
4. The part number/letter and quantity needed
If you have this information ready, we will be able to process
your request promptly. Thank you
LOT# DATE PURCHASED________________

PARTS AND HARDWARE

BEFORE YOU BEGIN, PLEASE FOLLOW ASSEMBLY INSTRUCTIONS
CAREFULLY. FOLLOW THEM STEP BY STEP.
Line-art
Part Name
Drawing
A Leg Frame 71 x 30 cm
B Wire Shelf 38 x 29.5 cm
C Top Panel 45.7 x 33 x 1.2 cm
Plastic
D 1.3 x 0.35 cm
Washer
Locking
E
Caster
F
Caster
Non-Woven
G 38 x 26.5 x 21 cm
Bin
Bottom Bin
H
36.2 x 25.2 cm
Support
1 0.5 x 2.8 cm
28mm
Screw
2
0.6 x 3 cm
30mm Bolt
Allen
3
5.6 x 2.2 x 0.4 cm
Wrench
4
Wrench 6.9 x 2.2 x 0.14 cm
MODEL: MS 30-084-006-63
/ /
Size Quantity Material Finish
2 Metal
3 Metal
1 MDF
12 Plastic
4 cm 2 Plastic
4 cm
2 Plastic
3 Fabric
3 Fabric
4 Metal
12 Metal
1 Metal
1 Metal
3
CAUTION :
1. Read this instruction manual and keep it for reference.
2. Adult supervision is required due to small parts.
3. Assemble on soft surfaces to prevent damage to the
product finish.
4. Recommended two people to assemble the product.
5. Estimated half hour for assembly.
6. Make sure all parts are included before assembly.
7. Call our toll-free customer service if needed.

ASSEMBLY TOOLS REQUIRED

PHILLIPS SCREWDRIVER
This unit is intended for use only with
the products and maximum weights
indicated. Use with other products or
products heavier than the maximum
wei ght s indic ate d may re sult in
instability causing possible injury.
Furniture can tip over or break if
improperly moved.

Step 1.

Attach WIRE SHELF (B) to each LEG FRAME (A) using 30MM BOLTS (2)
and PLASTIC WASHERS (D) as shown.
Silver
Silver
Black
B Wire Shelf - 1 PC
Black
D Plastic Washer - 4 PCS
2 30mm Bolt - 4 PCS
Black

Step 2.

Repeat STEP 1. Attach WIRE SHELF (B) to each LEG FRAME (A) using
Black
30MM BOLTS (2) and PLASTIC WASHERS (D) as shown.
Black
Black
D
B
Silver
Silver
2
Silver
2
Silver
2

ASSEMBLY INSTRUCTIONS

D
2
D
D
2
D
4
10 lbs.
D
D
2
B
2
2 D
2
B Wire Shelf - 1 PC
D Plastic Washer - 4 PCS
2 30mm Bolt - 4 PCS