Table of Contents
Advertisement
SETTING UP SHOOTING FUNCTION
Moving image shot
You can shoot a moving image up to a maximum of 30 seconds.
When a shot is completed, it is automatically set up as single shot mode.
If you press the ENTER button after selecting Moving image shooting
mode, the MOVIE SET screen will appear. You will be able to change the
REC SIZE and REC TIME by using the direction buttons.
1
If you press the ENTER button after selecting the moving image, recording size & time with the 4 direction
buttons on the MOVIE SET menu, it goes back to the setup MENU screen and the selected moving
image recording time is displayed as updated. If you press the MENU button, the setup MENU screen is
canceled and the camera is ready for the moving image shot.
If there is not enough space on the memory card, the moving image shot will be canceled.
2
If the time set for the moving image shot has not expired, shooting will continue until it has finished, even
3
without the shutter button being pressed.
4
Image resolution, shooting time and file format of the moving image shots are shown below.
Image resolution
192 144 pixels
400 296 pixels
Reference
If you setup the moving image shot in dark places, the "LOW ILLUMINANCE" mark will appear on the LCD
monitor. In this instance, the quality will not be good. It is better to take the photos in good light conditions.
If you want to cancel the moving image shot while you are using it, press the POWER button.
When you are shooting a moving image, the quality of the shot is set at
(
)(1/16). You can take pictures regardless of the selection of the picture quality on the
PROPERTY function block.
46
Recording time of Moving image is marked.
Shooting time
10 ~ 30 sec.
(5sec. interval)
File Format
Advertisement
Table of Contents
