Summary of Contents for Prolight S8 DMX Distribution Splitter
- Page 1 S8 DMX Distribution Splitter User Manual S8 DMX Distribution Splitter Order code: BOTE71...
-
Page 2: Safety Advice
• Repairs, servicing and power connection must only be the power-cable by the plug. Never pull out the plug by carried out by a qualified technician. THIS UNIT CONTAINS pulling the power-cable. NO USER SERVICEABLE PARTS. • Make sure that the available mains supply voltage • This fixture is for professional use only - it is not designed is 240V AC, 50Hz. for or suitable for household use. The product must be • Make sure that the power cable is never crimped or installed by a qualified technician in accordance with local damaged. Check the equipment and the power cable territory regulations. The safety of the installation is the periodically. responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock • If the equipment is dropped or damaged, disconnect the and falls. mains power supply immediately and have a qualified engineer inspect the equipment before operating again. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk S8 DMX Distribution Splitter User Manual... - Page 3 S8 DMX Distribution Splitter for truss clamps or wall mounting. • 8 x 3-Pin XLR outputs • Link output with switchable termination facility • Sturdy, steel chassis with multiple mounting options • IEC power input Specifications Power supply 240V, 50Hz Fuse 1A 250V Dimensions 315 x 175 x 60mm Weight 2.1kg Order code BOTE71 175mm 60mm S8 DMX Distribution Splitter www.prolight.co.uk S8 DMX Distribution Splitter User Manual...
-
Page 4: Technical Specifications
Technical specifications S8 DMX Distribution Splitter In the box: 1 x DMX distribution splitter, 01 - 8 x DMX outputs 04 - DC/DMX output indicators 07 - Fuse: 1A 250V 1 x power cable 02 - 3-Pin XLR DMX input 05 - Terminate/Link out button 08 - Earth point & 1 x user manual 03 - 3-Pin XLR DMX output link 06 - IEC power input www.prolight.co.uk S8 DMX Distribution Splitter User Manual... -
Page 5: Operating Instructions
DMX OUTPUT 5 DMX OUTPUT 4 DMX OUTPUT 3 DMX INPUT DMX OUTPUT 1=Ground 1=Ground 2=Data- 2=Data- 3=Data+ 3=Data+ TERM TERMINATE LINK OUT DMX OUTPUT DMX INPUT DMX OUTPUT 1 DMX OUTPUT 2 DMX Controller www.prolight.co.uk S8 DMX Distribution Splitter User Manual... -
Page 6: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk S8 DMX Distribution Splitter User Manual... - Page 7 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk S8 DMX Distribution Splitter User Manual...
-
Page 8: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk S8 DMX Distribution Splitter User Manual...