Pairing the headset..........6 Multi-pairing method .......... 9 Making phone calls..........10 Playing music............11 Using 3D sound............11 Resetting the headset........12 LED status information........12 Maintaining ..............12 Replacing the earphone pads......13 Troubleshooting ............14 Specifications..............19 Legal notices ..............19 One-year limited warranty.........21 RF-MAB2 Bluetooth Stereo Headset...
• AC and USB charging Package contents • Bluetooth stereo headset • Replacement earphone pads • AC wall adapter • USB charging cable • Quick Setup Guide Components Volume Logo with LED Play/Pause Receiver Power/Talk Receiver USB port Microphone RF-MAB2 Bluetooth Stereo Headset...
The headset comes with a rechargable battery pre-installed. To charge or recharge the battery: If the headset is turned on, press and hold (Talk) for about three seconds to turn it off. Connect the USB charging cable to the headset. RF-MAB2 Bluetooth Stereo Headset...
Page 5
Note: The first time you charge the battery, leave the headset connected to the USB cable or AC wall adapter for at least three hours. Note: When the battery charge is low, the red LED flashes and an alarm sounds. RF-MAB2 Bluetooth Stereo Headset...
On the phone or MP3 player when paring mode is activated, select RF-MAB2 from the list of discovered devices, then enter the password 0000 (four zeros) to pair the headset. For instructions, see the device's documentation.
Page 7
Double-click the RF-MAB2 icon on the computer or highlight the icon and click Next. Click Close after the headset has been paired. Click Start, then click Control Panel. Click Hardware and Sound, then under Sound, click Manage audio devices. On the Recording tab, select Headset Microphone Bluetooth Hands-free Audio, then click Set Default.
Page 8
Double-click the RF-MAB2 icon on the computer or highlight the icon and click Next. Note: If you are unable to locate the RF-MAB2 icon, click the Search Again button. Enter 0000 (four zeros) in the Bluetooth security code field, then click Next.
(Talk) until the LED blinks blue and red rapidly, indicating pairing mode is activated (this typically takes three to six seconds). Select RF-MAB2, then click Continue. The computer gathers information. Click Continue. Enter 0000 (four zeros) into the Passkey field, then click Continue.
Making phone calls Do this: Voice dial Press (Talk) once. (Some phones may not support this function.) Redial Press (Talk) twice. Answer a call Press (Talk) once. End a call Press (Talk) once. RF-MAB2 Bluetooth Stereo Headset...
Delivers a natural and soft 3D sound field that simulates Live a live performance. Provides a panoramic 3D audio image of widely spread Wide main vocal and center-placed instruments. Delivers a wide stereo sound image, but enhances low-frequency sound to provide rich, deep bass tones. RF-MAB2 Bluetooth Stereo Headset...
• If the headset gets wet, avoid exposure to heat or an electrical current. Contact a service center or the store where you purchased the headset. • Do not use any charging device except the device that came with the headset. RF-MAB2 Bluetooth Stereo Headset...
Rotate the earphone cover counterclockwise and remove the earphone cover. Remove the earpad fabric from the earphone cover. Place the new earpad around the earphone cover, making sure that the tabs in the earphone cover are visible in the openings of the new earpad. RF-MAB2 Bluetooth Stereo Headset...
I cannot replace the battery • The rechargeable battery is not a customer replaceable part. The AC wall adapter or USB • New AC wall adapters and USB charging cables are not available for purchase. charging cable was damaged. RF-MAB2 Bluetooth Stereo Headset...
Page 15
I cannot pair the headset • The headset only works with devices that support the HSP, HFP, or A2DP profile. Therefore, you cannot pair the headset with other devices with devices such as a regular cordless phone. RF-MAB2 Bluetooth Stereo Headset...
Page 16
Sound playback list if it is an option. • Mac: 1 Click the System Preferences, then click Sound. 2 Under Output and Input, select RF-MAB2. The headset does not • Make sure the volume on your audio source (for example, a...
Page 17
Bluetooth Stereo Audio from the Sound recording list. Select Bluetooth Hands-free Audio from the Sound playback list if it is an option. • Mac: 1 Click the System Preferences, then click Sound. 2 Under Output and Input, select RF-MAB2. RF-MAB2 Bluetooth Stereo Headset...
Page 18
Bluetooth Stereo Audio from the Sound recording list. Select Bluetooth Hands-free Audio from the Sound playback list if it is an option. • Mac: 1 Click the System Preferences, then click Sound. 2 Under Output and Input, select RF-MAB2. RF-MAB2 Bluetooth Stereo Headset...
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF-MAB2 Bluetooth Stereo Headset...
Page 20
Ce dispositif est conforme à la norme de l'industrie RSS exempts de licence (s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif. RF-MAB2 Bluetooth Stereo Headset...
One-year limited warranty Rocketfish Products (“Rocketfish”) warrants to you, the original purchaser of this new RF-MAB2 (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for one (1) year from the purchase of the Product (“Warranty Period”). This Product must be purchased from an authorized dealer of Rocketfish brand products and packaged with this warranty statement.
Need help?
Do you have a question about the RF-MAB2 and is the answer not in the manual?
Questions and answers