Desktop Device Manager Application - AudioQuest Beetle User Manual

Desktop Device Manager Application

Available for Mac OS X and Windows 7, 8.1,
and 10
The AudioQuest Desktop Device Manager Application allows you to
perform the following tasks:
Identify your Beetle's serial number and software version to ensure
¡
that the device is up to date.
Change the name of your Beetle.
¡
Clear Bluetooth addresses from your Beetle's memory.
¡
In Order to Install the AudioQuest Desktop Device Manager
Application:
1. Go to: http://www.audioquest.com/Beetle/app and download
the latest Device Manager available for your operating system.
2.
Double-click the installer icon and follow the onscreen instructions
until complete. The application's icon will appear on your desktop.
3.
To run the Device Manager Application, double-click the application's
icon.
4. A window will appear, asking you to connect a Beetle device to your
computer (via USB). Once you have done so, a new window will appear,
with tabs and controls that allow you to set various preferences.
5. The Device Manager Application will automatically check for available
software updates. However, if you'd like to manually check for
updates, you can do so whenever you wish by clicking the "Check for
Updates" button. If an update is available, the "Update Now" button
will be enabled. Click this button to start the update process.
32
PLEASE DO NOT DISCONNECT YOUR BEETLE DURING THE UPDATE
¡
PROCESS. Doing so can leave the Beetle in a non-functional state.
If, for any reason, your Beetle is disconnected during the update
process, or your computer unexpectedly shuts down during the
update process, your Beetle may be rendered unusable. To reset your
Beetle, click the Advanced button. (See below.)
RESETTING YOUR BEETLE: With your Beetle connected to your
¡
computer's USB port via USB cable, click the Advanced button,
located in the lower left hand corner of the Device Manager window.
Select "Reset Now. " You will be asked to "Confirm" or "Cancel" this
action. Select "Confirm" and wait for the application to finish the
reset process. Again, please do not disconnect your Beetle during
the reset process. If, for any reason, your Beetle is disconnected
during the reset process, simply reconnect Beetle via USB cable and
perform the reset process again.
Once the update/reset process is complete, the Device Manager
¡
Application will display the following message: The update is
complete and it is safe to disconnect your device. However, at this time,
you may choose to change the name of your Beetle. With Beetle still
connected to your computer via USB cable, use the Name tab to
view and change the name of your device. (See "Naming Your Beetle"
below.)
Once you have checked for updates and/or made your desired
¡
changes, disconnect the Beetle and quit the Device Manager
Application. Your Beetle is ready to use.
33