Setting Up Your First Alert - Temperature alert TM-ZP200 User Manual

You can use up to 15 ZPoint Nodes with the TM-CELL400-Z Gateway and up to
25 ZPoint Nodes with the TM-CELL400-IND-Z Gateway.

Setting Up Your First Alert

Temperature@lert ZPoint Cellular Gateway and Nodes are primarily controlled
via the Sensor Cloud website located at www.myalertlist.com.
Log into www.myalertlist.com using the username and password you created
when you purchased the device. To setup a temperature alert notification,
follow these steps:
1. Click on the Device List tab.
2. In the Device List table, click on the view link for your device.
3. Scroll to the bottom of the page
4. Next to Sensor Alerts, click the Edit link.
5. Click the Add Alert link.
6. Enter a name for the alert.
7. Choose Temperature for the condition.
8. Set the alert for above or below the temperature reading.
9. Enter the temperature threshold in degrees that will trip the alert.
10. Click the Add Action link.
11. Select Email, Phone, or SMS and enter the email or phone number.
12. Click the Send on Clear Also box to be notified when the temperature
comes back in range.
13. Click the Save button.
Please review the Sensor Cloud user guide at temperaturealert.com/support
for detailed instructions on setting alerts.
10 |
ZPOINT Rev 1.0 | http://www.temperaturealert.com/ | © 2013 Temperature@lert