Initial Setup - Baratza ENCORE Quick Start Manual

INITIAL SETUP

1. Hand-wash the hopper lid (1), hopper (2), black silicone gasket
(4), and ground coffee bin
thoroughly. Do not wash the removable ring burr (5) in water or it
will rust.
2. Line up the knob
stem of the switch on the right side of the unit and press the knob
fully in place. You can wiggle the knob if you're having trouble
getting it fully seated.
3. The ring burr (5) has a red tab and it should be pointing to
grind setting 30
4. Be careful not to tear the gasket.
ring burr (5), align the gasket notches with the ring burr tabs (one
of which is red) and gently work the gasket down until it is seated
on the top ⅛" (4mm) of the ring burr (5).
5. To install the hopper, ensure the silver grind setting indicator
positioned to the right, and aligned with the silver triangle marker
on the case. Press the hopper down and twist clockwise to setting
20. You should hear the hopper click as it rotates.
If Step 5 is not working well: The black grind adjustment ring
must be rotated fully counterclockwise for the hopper to install. You
can rotate the grind adjustment ring
continue from step 3.
During normal operation, the coffee tends to mound up in the bin when
being discharged from the grinder. To prevent unnecessary clogging,
empty the ground coffee bin when it is 2/3 of the way full.
Parts Identification
Hopper Lid
1.
2. Bean Hopper
3. Grind Setting Indicator
4. Black Silicone Gasket
(cut away in 2nd illustration)
Removable Ring Burr
5.
6. Grind Adjustment Scale
7. Pulse Button
8. Ground Coffee Bin
(8) in warm, soapy water, and dry
(9) (stored in the ground coffee bin (8)) with the
Place the gasket
(13)
On/Off Knob *
9.
10. Brush *
11. Weighted Base
12. Grind Adjustment Tab
13. Grind Adjustment Ring
Burr Alignment & Lifting
14.
Tabs
15. Wingnut (do not remove)
16. Center Cone Burr
ENCORE & VIRTUOSO QUICK START GUIDE
(4) on top of the
(3)
(13)
by hand if needed and then
1
2
4
5
is
8
4
5
16
1 0
* included in ground coffee bin
3
6
7
9
10
11
12
13
14
3 0
20
15