Samsung BN68-01416A-00 User Manual page 40

4.5 Common Interface
− Installing the CI Card
 Purchase the CI CAM module by visiting your nearest
dealer or by phone.
 Insert the CI CARD into the CAM in the direction of the
arrow until it fits.
 Insert the CAM with the CI CARD installed into the
common interface slot.
➢
Insert the CAM in the direction of the arrow, right up
to the end so that it is parallel with the slot.
 Check if you can see a picture on a scrambled signal
channel.
➢
You can install the CAM anytime whether the TV is
ON or OFF.
− Application Info.
This contains information on CAM inserted in the CI slot and
displays it.
 Press the ENTER button to display the information for your application.
− CI Menu
This helps the user select an item from the CAM-supported menu.
 Press the ENTER button. The options of the selected menu are displayed.
Press the ▲ or ▼ button to select the required option, then press the ENTER button.
➢
Select the CI Menu based on the PC Card menu.
4. System
This menu consists of 5 sub-menus:
Product Information, Signal Information, Software
Upgrade, and Reset.
− Product Information
You can view your product information. For service or repair,
please contact a Samsung approved dealer.
 Press the ENTER button with Product Information
selected. The product information menu is displayed.
− Software Version / Firmware Version
− Signal Information
You can get information about the signal status.
 Press the ENTER button with Signal Information
selected. The technical information for signal status is
displayed.
− Service / Service ID / Multiplex / Network / Bit
error level / Signal Strength
Continued...
English - 40
DTV
Application Info.
Type: CA
Manufacturer: Canal Plus
Info: Top Up TV
Return
CI Menu
Move Enter
DTV
Setup

System
Move Enter
DTV
System
Product Information
Signal Information
Software Upgrade
Reset
Move Enter
DTV
Product Information
Software Version: T-PERLDEUC-1004
Firmware Version: T-EMMAZDEUB-010
Return
DTV
Signal Information
Service: ?
Service ID: 0000
Multiplex: ? (TSID 0000,ONID 0000)
Network: ? (ID 0000)
Bit error level: 10
Signal Strength: 0
Return
Exit

Return




Return