Table of Contents
Advertisement
Quick Links
User Instruction & Installation Manual
A4184 – DECK LV
A4188 – DECK HV 300W
A4187 – DECK PEDESTAL HV
Manufacturer's details:
Francis Searchlights Ltd
Union Road, Bolton
Lancashire, BL2 2HJ, UK
Tel:
+44 (0) 1204 558960
Fax:
+44 (0) 1204 558979
http://www.francis.co.uk
E-mail: sales@francis.co.uk
FSP300
Signalling Projector
Product Reference Number:
Manual Part Number: C14855
Issue: 5
A4185 – DECK HV
A4186 – DECK PEDESTAL LV
A4189 – DECK PEDESTAL HV 300W
Distributor details:
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Francis Searchlights FSP300
- Page 1 A4188 – DECK HV 300W A4186 – DECK PEDESTAL LV A4187 – DECK PEDESTAL HV A4189 – DECK PEDESTAL HV 300W Manufacturer’s details: Distributor details: Francis Searchlights Ltd Union Road, Bolton Lancashire, BL2 2HJ, UK Tel: +44 (0) 1204 558960 Fax: +44 (0) 1204 558979 http://www.francis.co.uk...
-
Page 2: Table Of Contents
CONTENTS - Introduction - Safety Precautions - Technical Information - Unpacking and Installation Instructions - Electrical Installation - Operating Instructions - Fault Finding - Maintenance and Servicing - General Assemblies - Spare Parts List... -
Page 3: Introduction
For your future reference please keep this manual in a safe place. Thank you for specifying a product from the Francis Searchlights range. All Francis products are designed to give complete customer satisfaction and are manufactured to the highest engineering standards in order to ensure optimum performance and service life. -
Page 4: Safety Precautions
2 - Safety Precautions The following instructions must be adhered to, in order to ensure a safe working environment and the safety of the user. Note: When unpacking or manoeuvring the searchlight into its fixing position, suitable lifting points must be used in order to prevent damage to the equipment or personal injury. -
Page 5: Technical Information
3 – Technical Information This product has been designed to operate in accordance with the product specification. The FSP300 searchlight has the following features: All marine grade materials and fixings; Parabolic glass reflector; Stove enamel painted; Full 360° horizontal rotation;... -
Page 6: Unpacking And Installation Instructions
4 - Unpacking and Installation Instructions The following instructions should be read and fully understood prior to installing the equipment to ensure that the correct procedures are followed, and all safety precautions are observed. Note: If the equipment has been in storage for a considerable amount of time, it is advisable to conduct a routine maintenance check on all parts before installation. -
Page 7: Electrical Installation
5 - Electrical Installation For safety purposes, only competent personnel should perform the electrical installation. All equipment should be installed to current Electrical Regulations and Standards. In order to obtain the maximum light output from the searchlight, it is essential that the full operating voltage of the lamp fitted be applied to the lampholder contacts. -
Page 8: Operating Instructions
The FSP300 signalling projector can be used for signalling or as a searchlight. To use as a searchlight, pull down the signalling lever so that the shutter is in the open position. Remove the shutter stop pin, which is attached to the crutch and insert into the lever guide bracket. - Page 9 Setting to Work Safe service in use necessitates the strict observance of the following precautions. Any article fabricated from quartz or glass is inherently fragile and care should therefore be taken, at all times, when handling lamps; Eye protection must be worn when handling lamps that have been removed from their packaging materials.
-
Page 10: Fault Finding
7- Fault Finding All fault finding must be conducted by a competent person or qualified Electrical Engineer. Failure of Lamp to ignite Causes: Power not supplied; Fuse blown; Failed lamp; Remedy: Check voltage at supply. If supply is not present the fault is at the customer supply. If power is present, see remedy 2;... -
Page 11: Maintenance And Servicing
8 - Maintenance and Servicing In order to prolong the service life and performance of your searchlight, the following maintenance guidelines are recommended: Maintenance checks should be conducted before every voyage or at least every three months; Before checking, disconnect the equipment from the supply; ... -
Page 12: General Assemblies
9 – General Assemblies Drawing Number Description A4184 FSP300 Deck L.V. A4185 FSP300 Deck H.V. A4188 FSP300 Deck H.V. 300w A4186 FSP300 Deck Pedestal L.V. A4187 FSP300 Deck Pedestal H.V. A4189 FSP300 Deck Pedestal H.V. 300w Back To Top... -
Page 19: Spare Parts List
Breather In order to prolong the life and performance of your product, we recommend that you only specify Francis Searchlights spare parts. This will ensure that any warranties on your equipment will not be invalidated. When ordering spare parts please contact the Sales Department at Francis Searchlights Limited.
Need help?
Do you have a question about the FSP300 and is the answer not in the manual?
Questions and answers