Advertisement
Assembly Instructions
Adjust Seat Back
Be sure the rocking mechanism is in the
locked position before using the
reclining feature.
To adjust the seat back: lift up on the
handle and adjust to the most comfortable
angle.
Reset to the upright position: lift up on the
handle, gently lean against the seat back
and it automatically returns to the upright
position.
Use the Tilt tension dial to increase or
decrease the rocking tension.
Warnings
1. Do not use this chair for purposes other than sitting, do not stand on the seat
2. Do not use chair as a ladder or step stool
3. Only use chair on flat surfaces to prevent turning over
4. This chair is design for single person use, maximum weight 265lbs.
5. Do not use chair to move heavy items
6. Do not use chair near flammable materials
7. Keep out of direct sunlight
8. Do not use chair near fire or in damp environments
9. Do not dismantle gas piston
10. Do not use the recline feature while rocking mechanism is engaged.
Care
Wipe with a soft dry cloth to clean the chair
To remove stain use a small amount of mild detergent diluted with
hot water, wipe until stain is removed, then dry the chair to remove
excess water and detergent
Seat Height and Rocking
Mechanism Adjustments
Tilt tension
dial
Lower the seat: Sit down and lift the
handle, the seat automatically lowers.
Raise the seat: Stand up and lift the
handle, the seat automatically rises up.
Unlock Rocking Mechanism: pull handle
to the right.*
Lock Rocking Mechanism: push handle to
the left.*
* Seat cannot be leaning back while performing
lock procedure
by
Button 1
Button 3
Button 1 moves the armrest up and down.
Button 2 slides the armrest side to side.
Button 3 the armrest forward and back.
Armrests also swivel in both directions.
Do not lift feet off the ground when the seat back is completely lowered
Do not push down on the headrest when the seat back is completely lowered
Be sure to LOCK the Rocking Mechanism before using the reclining feature
www.RapidX.io
Adjust Armrests
Button 2
armrest also swivels out
3
2
1
Advertisement
