Server Appliance for Atlona Management System AT-AMS-HW The Atlona AT-AMS-HW is a hardware dedicated to running AMS. Use the AMS-HW to run the AMS software with a local display, or anywhere on a network PC. The Atlona Management System (AMS) is a free, powerful software resource for select Atlona IP-controllable products in commercial, educational, government and residential environments.
Installation Guide AT-AMS-HW Panel Descriptions AT-AMS-HW DC 5V HDMI OUT ETHERNET ETHERNET Indicator will illuminate when receiving Connect an Ethernet cable from this port power. to the same network as the controlled devices. DC 5V Connect the included 5V power supply here.
AT-AMS-HW Mounting Instructions The AT-AMS-HW encoder includes two mounting brackets and four mounting screws, which can be used to attach the unit to any flat surface. Position one of the mounting brackets, as shown below, aligning the holes on the side of the enclosure with one set of holes on the mounting bracket.
Connect included 5V power supply to the DC 5V port. The AT-AMS-HW acts as a server for AMS, once connected to the network, it will be accessible through a computer on the same network or through the hardware using a keyboard and mouse.
Installation Guide AT-AMS-HW Connection Diagram Local Display U SB S- H A T- AT-AMS-HW N ET ET H AT-HDR-EX-70-2PS-TX -H 2H AT -H AT-HDR-H2H-44M AV LAN AT-UHD-SW-510W AT-HDR-EX-70-2PS-RX D- SC AT -H AT-HDR-M2C A IN AT-HD-SC-500...
Installation Guide AT-AMS-HW Troubleshooting Problem Cause Solution I can’t find my unit on the Unable to locate DHCP • Check the network switch to network and when I check server on the network. ensure it is DHCP capable. the IP it shows 169.254.X.X.