Advertisement
Copyright
© 2017, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: T810264
Release: AC
Commit: 45029
Head: 45029
Language: en-US
Modified: 2017-09-18
Formatted: 2017-09-18
Website
http://www.flir.com
Customer support
http://support.flir.com
Disclaimer
Specifications subject to change without further
notice. Models and accessories subject to
regional market considerations. License
procedures may apply. Products described herein
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any
questions.
1 (10)
Notice to customer
Changing and calibrating lenses
Table of contents
1 Thank you! ............................................................................................... 1
2 Applicability .............................................................................................. 1
3 Changing lenses (FLIR Exx series) ................................................................ 2
4 Changing lenses (FLIR T5xx series)............................................................... 5
5 Calibrating the lens-camera combination ........................................................ 8
6 Customer support ...................................................................................... 9
7 Appendix ............................................................................................... 10
1 Thank you!
Thank you for choosing a product from FLIR Systems. We hope that the product will
meet your expectations and that you will consider us again for your future needs.
2 Applicability
Note Part numbers subject to change and/or amendment without further notice.
Please check
http://support.flir.com
2.1 Lens applicability
Sales order P/N
T199588
T199590
T199589
2.2 Camera applicability
P/N
78502-0101
78504-0101
78506-0101
78505-0101
78503-0101
78507-0101
78502-0201
78504-0201
78506-0201
78505-0201
78503-0201
78507-0201
78502-0301
78504-0301
78506-0301
78505-0301
78503-0301
78507-0301
79302-0101
79304-0101
79306-0101
79305-0101
79303-0101
www.flir.com
for latest applicability data.
Item P/N
T199106
T199104
T199105
Product denomination
FLIR E75 24°
FLIR E75 24° + 14°
FLIR E75 24° + 14° & 42°
FLIR E75 24° + 42°
FLIR E75 42°
FLIR E75 42° + 14°
FLIR E85 24°
FLIR E85 24° + 14°
FLIR E85 24° + 14° & 42°
FLIR E85 24° + 42°
FLIR E85 42°
FLIR E85 42° + 14°
FLIR E95 24°
FLIR E95 24° + 14°
FLIR E95 24° + 14° & 42°
FLIR E95 24° + 42°
FLIR E95 42°
FLIR E95 42° + 14°
FLIR T530 24°
FLIR T530 24° + 14°
FLIR T530 24° + 14° & 42°
FLIR T530 24° + 42°
FLIR T530 42°
Product denomination
Lens 14° + case
Lens 42° + case
Lens 24° + case
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for FLIR T199106
-
Page 1: Table Of Contents
1 Thank you! Release: AC Commit: 45029 Head: 45029 Thank you for choosing a product from FLIR Systems. We hope that the product will Language: en-US meet your expectations and that you will consider us again for your future needs. Modified: 2017-09-18... -
Page 2: Changing Lenses (Flir Exx Series)
79307-0101 FLIR T530 42° + 14° 79302-0201 FLIR T540 24° 79304-0201 FLIR T540 24° + 14° 79306-0201 FLIR T540 24° + 14° & 42° 79305-0201 FLIR T540 24° + 42° 79303-0201 FLIR T540 42° 79307-0201 FLIR T540 42° + 14°... - Page 3 Changing and calibrating lenses 3. The infrared detector is now fully exposed. Do not touch this surface. If you see dust © 2017, FLIR Systems, Inc. on the detector, follow the instructions in 7.2 Infrared detector, page 10. #T810264; r. AC/45029/45029; en-US 4.
- Page 4 Notice to customer Changing and calibrating lenses 5. Carefully push the lens into position. © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US 6. Rotate the inner ring of the lens 30° clockwise. The lens makes a click when it locks in place.
-
Page 5: Changing Lenses (Flir T5Xx Series)
Notice to customer Changing and calibrating lenses 4 Changing lenses (FLIR T5xx series) © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US Note If the new lens has not been used with the camera before, the lens–camera com- bination must be calibrated after the lens has been mounted. See section 5 Calibrating the lens–camera combination, page 8 for information on how to do this. - Page 6 Changing and calibrating lenses 3. The infrared detector is now fully exposed. Do not touch this surface. If you see dust © 2017, FLIR Systems, Inc. on the detector, follow the instructions in 7.2 Infrared detector, page 10. #T810264; r. AC/45029/45029; en-US 4.
- Page 7 Notice to customer Changing and calibrating lenses 5. Carefully push the lens into position. © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US 6. Rotate the inner ring of the lens 30° clockwise. The lens makes a click when it locks in place.
-
Page 8: Calibrating The Lens-Camera Combination
Before a new lens can be used with the camera, the lens–camera combination must be calibrated. This is a process that previously had to be performed by a FLIR service department, but for the FLIR Exx series and FLIR T5xx series the calibration can be performed by the user, using a calibration target. -
Page 9: Customer Support
3. Mount the new lens on the camera according to the procedure in section 3 Changing © 2017, FLIR Systems, Inc. lenses (FLIR Exx series), page 2 or section 4 Changing lenses (FLIR T5xx series), #T810264; r. AC/45029/45029; en-US page 5. When the lens is mounted, the calibration wizard starts automatically. -
Page 10: Appendix
Notice to customer Changing and calibrating lenses 7 Appendix © 2017, FLIR Systems, Inc. #T810264; r. AC/45029/45029; en-US 7.1 Infrared lens 7.1.1 Liquids Use one of these liquids: • A commercial lens cleaning liquid with more than 30% isopropyl alcohol.
Need help?
Do you have a question about the T199106 and is the answer not in the manual?
Questions and answers