I.PRODUCT INTRODUCTION 1.PRODUCT DESCRIPTION Multi-functional Microphone YEMENREN K3 is a combination of microphone and loudspeaker. It is a perfect Karaoke product which could satisfy your singing needs in the situations like small family gatherings and family members meetings. You don’t have to buy expensive and professional equipment for it any more.
2. PRODUCT APPEARANCE AND BUTTON FUNCTIONS There are two loudspeakers on the “2” position...
Page 4
Name Functions Microph Collect sounds, especially human voices Double Speaker function loudspe (including human voice akers and music) Power Power on/off (press and button hold) Treble Adjust the microphone input effect, the larger the Treble value, the better the input treble effect Adjust the microphone input volume...
Page 5
No. Name Functions PREV Switch to the last song. Press and hold to rewind. Next Switch to the next song. Press and hold to fast forward. Play/Pause Play or pause the song. M Button Press the M button to stop the music inputting function, and it only can input through the...
It will have a warning tone when you power on or off. 2. Charge: Use the data cable below. Connect the A end to K3’s Micro USB Slot and B end to a computer or a USB charger to charge K3.
Page 7
Bluetooth pairing state. Turn on your smart cellphone’s Bluetooth function and search for the pairing name “K3”. Press it to pair. You will hear a prompt tone if the pairing is completed.
Page 8
(Find the following audio cable from the box) Connect the A end to K3’s Micro USB Slot and B end to the playing device which don’t have Bluetooth function (such as a traditional MP3 player or an old model laptop).
Page 9
You need to set the MIC VOL to a suitable value (generally the largest) in this scene. Use Bluetooth or an audio cable to connect the music player and K3. and refer to the loudspeaker scene for the three connecting ways.
III.TECHNICAL PARAMETERS Items Specification Product Model Dimension 245*75*75mm Net Weight 313g Slot Micro USB and Micro SD Type: 18650,lithium Battery Type battery Battery 2800mAh Capacity Charging Time 3-4 hours Charging Voltage and DC 5V~1A Current Loudspeaker 2*3W(6W) Output Power Support Micro SD card Expansion Slot (TF card)
Micro USB end to K3, and the 3.5mm connector to the phone. 2. THE SOUND IS INTERMITTENT VIA BLUETOOTH CONNECTION Check if the phone is far away from K3, or there are obstacles between them.
Page 12
Check if there is strong wifi signal near K3 or the phone, because Bluetooth and wifi are both in 2.4G frequency range. 3. THE LOUDSPEAKER HAS A BUZZ WHEN THE DEVICE IS STANDBY. It will produce internal current when the microphone and the loudspeaker are both on, so there will be some internal noise.
Page 13
Please turn off K3 using the power button when you don’t use it. Please keep the microphone facing up, and make sure there isn’t any other object near it when you put K3 somewhere temporarily. Please turn the MIC VOL to the lowest when you only use the loudspeaker.
Page 14
WHEN IT'S PLAYING VIA BLUETOOTH. Maybe the volume is too high or the battery is too low. Please charge K3 at once and adjust to a suitable volume when you play the music next time. 8. THERE IS NO SOUND FROM THE MICROPHONE.
Need help?
Do you have a question about the K3 and is the answer not in the manual?
Questions and answers