Installation Manual
FRS311000S00 Single Receiver
FRS322000S00 Dual Receiver
FRS344000S00 Quad Receiver
1, 2 and 4 Camera Stand Alone Receiver
Note: This installation should be made by a qualified service
person and conform with local codes.
Reduce risk of fire or electrical shock do
!
not expose this product to rain or moisture.
Specifications
Video Connection
Connector
Output Impedance
Output Level
Frequency Response
Optical Connection
Connector
Path Loss
No Customer adjustments are available within the unit.
Wavelength
Power Connection
Supply
Power/Video/Opto LED
Color
Green
Yellow
(RX) Link working, No video at TX
Red
(TX) Power on, No video into TX
(RX) Power on, No opto into RX
Installation Instructions
- The fiber receiver is designed to be mounted using the included bracket.
- Always allow for bend radius of optical and electrical cables when installed.
- There are no adjustments required when using this product.
Service Information
There are no user serviceable parts inside the unit. In the event that service is required to this unit please
contact NITEK Technical Support at 800-528-4343.
75 ohm BNC Socket
75 ohm terminated
1 volt p-p nominal
10Hz to 5.75MHz
SC Style
20dB
1310 / 1550nm
12 to 24VDC @ 300mA
Description
System Normal
NITEK
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
680600120 Rev 02092009
VIDEO CH1
NITEK
R
VIDEO CH3
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
VIDEO CH2
VIDEO CH4
POWER
-
12-18 VDC,
+
CLASS 1
300mA, Class 2
FRS344000S00
VIDEO CH1
NITEK
R
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
VIDEO CH2
POWER
-
12-24 VDC,
CLASS 1
+
300mA, Class 2
FRS322000S00
VIDEO CH1
NITEK
R
Fiber Optic Video Transmission Systems
WWW.NITEK.NET
800-528-4343
VIDEO CH2
POWER
-
12-24 VDC,
+
CLASS 1
300mA, Class 2
FRS311000S00
®
CH1
CH2
CH3
CH4
POWER
VIDEO / OPTO
CH1
CH2
OPTO IN / OUT
CH3
CH4
CH1
CH2
POWER
VIDEO / OPTO
CH1
OPTO IN / OUT
CH2
CH1
CH2
POWER
VIDEO / OPTO
CH1
OPTO IN / OUT
CH2