Rack Dry - Samsung DV410AE series User Manual

operating instructions, tips

RACK DRy

Installing the drying rack
1. Open the dryer door.
2. Position drying rack in tumbler, placing the front lip of the drying rack on the top of the lint
filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall then push down the
middle of the drying rack to fix.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start dryer. It may be necessary to reset the timer if a longer drying time is needed.
SuGGeSted iteMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
and lead to a fire hazard.
WarninG
26_ operating instructions, tips
DV410AE-02709C_EN.indd 26
SuGGeSted teMp. SettinGS
Heat (Extra Low)
Heat (Extra Low)
Air Fluff
Air Fluff
Air Fluff
2010-06-08 4:14:27