GOAL ZERO YETI Startup Manual

GOAL ZERO YETI HOME INTEGRATION KIT
®
START UP GUIDE
THIS TRANSFER SWITCH MUST BE INSTALLED ONLY BY A QUALIFIED ELECTRICIAN WITH A THOROUGH
KNOWLEDGE OF ALL APPLICABLE ELECTRICAL AND BUILDING CODES.
For questions regarding installation or the transfer switch, contact Reliance Controls Customer Service Team
Monday through Friday, 8am to 5pm CT at 1-800-634-6155.
2
1
1

THE HOME INTEGRATION KIT INCLUDES

1. Goal Zero Yeti Extension Cable (10ft, 14AWG)
2. Reliance PRO/TRAN 2
(with operation and installation guide)

TIPS ON SELECTING CIRCUITS

With the help of a qualified electrician, you can wire up to four circuits from
your breaker into the transfer switch. The most common circuits selected
are for refrigerators, bedroom outlets, lights in hallways/gathering
places, etc. Keep in mind the technical specifications of your Goal Zero
Yeti Portable Power Station – watt-hour capacity affects runtime, inverter
specs affect appliance compatibility.
Check the User Manual included with your Goal Zero Yeti Portable Power
Station for help on WHAT IT POWERS or call Goal Zero's Solutions Center
at 888-794-6250.
HOW TO SET UP YOUR GOAL ZERO YETI
Once you have installed the transfer switch with the help of a qualified
electrician, simply plug in your Goal Zero Yeti Portable Power Station using
the included extension cable.
1. Insert the female connector of the extension cable into the power inlet
on the Transfer Switch.
2. Insert the male plug into one of the AC ports on the Yeti. If possible,
leave your Yeti plugged into an outlet at all times to ensure it is charged
up and ready to go if the power goes out.
2
Manual Transfer Switch
®