Advertisement
Quick Links
Advertisement
Related Manuals for Peter Pepper NIK Desk
Summary of Contents for Peter Pepper NIK Desk
- Page 1 NIK Desk / Magic Drawer Installation Guide NIK Desk / Magic Drawer Installation Guide page 1...
-
Page 2: What's In The Box
(secure with a zip tie), one Allen wrench and 4 socket screws. Allen wrench, 4 sockets screws Zip tie It is recommended to leave this on until installation is completed. NIK desk / drawer installation guide page 2... - Page 3 Important: if you installed the thumb screws to secure the glass you will have to remove those under the desk before being able to remove the glass. Glass Dock shelf Dock plate NIK desk / drawer installation guide page 3...
- Page 4 Place the drawer with the closed surface facing up on the inside of the desk and the zip-tied cut- out handle towards the front of the desk. Desk without the drawer It is helpful to leave the zip-tie on the drawer until the installation is completed Desk with the drawer NIK desk / drawer installation guide page 4...
- Page 5 The desk and the drawer have 2 holes in each side. In the back make sure to use the upper hole (i.e. furthest from the table top) for the attachment. In the back use the upper hole for the attachment NIK desk / drawer installation guide page 5...
- Page 6 The desk has 2 holes, but the drawer only one. In the front make sure to use the lower hole for the attachment (i.e. closest to the table top). In the back use the lower hole for the attachment NIK desk / drawer installation guide page 6...
- Page 7 Cut the zip tie with scissors, pliers or a knife, put the glass, dock plates and dock shelves back on and you are ready to go. If you need further assistance please contact us at customerservice@peterpepper.com NIK desk / drawer installation guide page 7...