Hoselink 5640 Product Manual

Kit contents
1x 9-Pattern Sprinkler
1x Hoselink Accessory Connector
Instructions
Step 1:
Connect to a water supply by attaching your Hoselink-
fitted hose end to the Accessory Connector on the
sprinkler.
Step 2:
Choose the desired spray setting by turning the black pat-
tern selector dial until it clicks into place, in front of the
brass water inlet.
Step 3:
Turn the water on.
Settings
There are 9 spray settings to choose from depending on
the watering application.
For more information visit www.hoselink.com.au or call 1300 900 617
Some settings may perform better than others according
to the supplied water pressure. For each setting, water
is emitted from the actual function selected, except for
the Soaker and Round Outer Rim functions as outlined
below.
1. Soaker: This is the only function which utilises the
centre fan. Water is emitted from the holes under
the fan blades. Please note the centre fan requires
good to strong water pressure in order to spin
2. Rounded Square: Sprays in a squarish shape with
rounded off corners.
3. Square: Sprays in a square shape.
4. Round Outer Rim: Sprays gentle jets from the holes
around the outside of the pattern selector dial.
5. Arc: Sprays in a rectangular arc in front of the
sprinkler.
6. Narrow Rectangle: Sprays in a narrow band to either
side of the sprinkler.
7. Classic Round: Sprays in a regular circular shape.
8. Half Moon: Sprays in a half circle in front of the
sprinkler.
9. Wide Rectangle: Sprays in a wide band to either side
of the sprinkler.

Troubleshooting

This is a strong and durable product that should give you
many years of service. Should you experience a blockage,
unscrew the Hoselink Accessory Connector and flush out
with water.
The mesh filter will stop large particles in the water from
entering the sprinkler. This can also be removed for
cleaning if necessary.
Product guide
9-Pattern Sprinkler
Item: 5640