Lista International Corporation 1006 Proper Usage And Installation

Proper Usage and Installation
for Lista drawer cabinets
CAUTION
!
ALWAYS BOLT CABINETS SIDE-TO-
SIDE OR ANCHOR TO THE FLOOR
BEFORE LOADING TO PREVENT
CABINET TIPPING.
ALWAYS SUPPORT
SIDE-MOUNTED
CABINETS BEFORE
REMOVING DRAW-
ERS TO PREVENT
CABINET TIPPING.
Lista International Corporation
106 Lowland Street, Holliston, MA 01746-2094
Telephone: (800) 722-3020
Fax: (508) 626-0353
www.listaintl.com
E-mail: sales@listaintl.com
ISO 9001 certified
Litho in U.S.A. Form No. 1006 11/07
1
Any free-standing Lista cabinet
must be fastened to the floor.
3
For cabinets with no base,
fork truck base or frame base,
insert angle piece into hole in
bottom. For the floor bolt kit,
ask for Part No. X1141-1.**
Mounting hardware is available
free of charge on request by
calling Lista Customer Service at
1-800-722-3020.
* SS-KIT includes (4) each nuts and bolts.
** X1141-1 includes (2) fastening brackets, anchors, hardware and
installation instructions.
2
Cabinets in a row should be
bolted together through the
sidewalls. The endwalls
should be fastened to the
floor (see #3 below). For the
side-to-side bolt kit, ask for
Part No. SS-KIT.
ANCHOR SLOT
4
Alternate anchoring for
cabinets with fork truck
base: properly anchor base
to floor at front and back
using the slots indicated.
• Properly position rear
anchors and bolts (cus-
tomer-supplied), allowing
enough clearance to slide
the cabinet into position.
• Install front anchors.