Download Print this page

ZETMAC BHZ306 User Manual

Table of Contents

Download this manual

1 Introduction

Thank you for buying ZetMac bluetooth Headset

other bluetooth devices connected with BHZ306 you will experience freedom in order to make

and receive calls - in the office and when you are out. You can pair the headset with a compatible

phone that supports bluetooth wireless

Please read the manual to achieve most features of this headset.

■ Overview

The headset contains the following parts as shown in the diagram:

(1) Answer / end button

(2) LED (red / blue)

(3) Volume up

(4) Volume Down

(5) Microphone

(6) Charging Connector

(7) Ear

Before start using the headset, you have to charge the battery and pair the headset with a

compatible phone.

Note: Parts of the headset are magnetic and can attract metallic materials. Do not place credit cards

or other magnetic media near the headset, because information on them may be erased.

BHZ306.

With bluetooth mobile phones and

technology.

Table of Contents

Do you have a question about the BHZ306 and is the answer not in the manual?

Page 1 BHZ306. With bluetooth mobile phones and other bluetooth devices connected with BHZ306 you will experience freedom in order to make and receive calls - in the office and when you are out. You can pair the headset with a compatible phone that supports bluetooth wireless technology.
Page 2 3. Activate the bluetooth feature on the phone and set the phone to search for Bluetooth devices. See your phone's manual for instructions. 4. Select the headset (BHZ306) from the list of found devices. 5. Enter the code 0000 to pair the headset with your phone. For some phones you may need to connect separately after are paired.
Page 3 ■ Switch a call between phone and headset If during a call , press the answer / end button for 3 seconds , switch off the BHZ306 headset and the call is transferred to your mobile phone. If you want to transfer the call back to the headset, you must again press the answer / end key and hold it for 3 seconds until you hear a beep.