Pioneer AVIC-W8400NEX Operation Manual page 55

Menu Item
[Verbose]
[Announce Route
Summary]*
[Announce Traffic Info]*
[Announce System
Messages]*
* Enabled only when a TTS-voice is selected for the voice language.
[Warnings]
Enables or disables warnings and sets up the warning function.
Important
• This system is able to warn you if you exceed the current speed limit. This information may not be
available for your region (ask your local dealer), or may not be fully correct for all roads on the map.
• You are liable for ensuring that using this feature is legal in the country where you intend to use it.
Menu Item
[Speed Warning]
[Warn When Speeding] Select whether to receive visible and/or audible warnings.
[Disabled]
[Visual]
[Audio and Visual] Audible and visible warnings will go off when exceeding
[Speed Limit Always
Visible]
[Outside Cities: ***% of
the Speed Limit]
[Within Cities: ***% of
the Speed Limit]
[Alert Points]
Description
Given once relatively far from the next maneuver, it is
repeated as the vehicle approaches the next maneuver,
and it is repeated again right before the actual maneuver.
Select whether to have the navigation system announce by
voice a quick summary of the route whenever a route is
calculated.
Select whether to have the navigation system announce by
voice the traffic information whenever a traffic incident on
your route is received.
Select whether to read out the message when a system
message appears.
Description
Set the type of speed and alert warnings.
No warnings will go off.
Visible warnings will go off when exceeding the speed
limit.
the speed limit.
Select whether to see the speed limit sign on the map all
the time. The color of the speed limit sign changes as
exceeding the speed limit when selected.
Set the percentage of the speed limit warning message in
rural areas.
Set the percentage of the speed limit warning message in
urban areas.
This setting allows you to receive a warning when
approaching alert points like school zones or railroad
crossings (page 56).
- 55 -