Screen Saver; System Select - Optional; Displaying File Information (Id3 Tag ); Radio Operations - LG S34S1-S Owner's Manual

22 Operating

Screen Saver

The screen saver appears when you leave the unit
in stop mode for about five minutes.

System Select - Optional

You must select the appropriate system mode for
your TV system. If "NO DISC" or "NO USB" appears
in the display window, press and hold M for more
than five seconds to select a system. (AUTO/NTSC/
PAL)
Displaying file information
(ID3 TAG )
While playing an MP3 file containing file
information, you can display the information by
pressing DISPLAY.
4

Radio Operations

Be sure to fully extend the FM wire antenna.

Listening to the Radio

1. Press FUNCTION until FM appears in the display
window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Press TUNING (-/+) repeatedly.
3. Adjust the volume by rotating VOLUME(-/+) on
the front panel or by pressding VOL + or - on
the remote control repeatedly.
DH3140S-F0_AZAFLLK_ENG_5470.indd 22
or

Presetting the Radio Stations

You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
1. Press FUNCTION until FM appears in the display
window.
2. Select the desired frequency by using
TUNNING (-/+).
3. Press PROG./MEMO. a preset number will flash
in the display window.
4. Press PRESET (w/s) to select the preset
number you want.
5. Press PROG./MEMO.
The station is stored.
6. Repeat the steps 2 to 5 to store other stations.

Deleting all the saved stations

1. Press and hold CLEAR for two seconds.
"CLEAR" will flash up on the unit display.
2. Press CLEAR to erase all of the saved radio
stations.

Improving poor FM reception

Press d on the remote control. This will change the
tuner from stereo to mono and usually improve the
reception.
2014-06-10 1:48:50