GRASS VALLEY INDIGO AV Mixer Quick Start Manual page 30

Section 5 — Basic Operation
5.3.5 Making a PiP (Picture in Picture) in SD Mode
5.3.6 Making a PiP (Picture in Picture) in HR Mode
5.3.7 PiP within a PiP in HR Mode
28
This type of transition inserts a picture into the background scene. The
background remains unaffected.
Note The following example uses Key 1 in SD mode, but you can also use Key 2.
To make a PiP:
1. Select
Key 1 [NEXT TRANSITION]
Key 1 [BUS DELEGATION]
2. Make sure
Key 1 [BUS DELEGATION]
3. Make sure
KEYER
4. Select the
SD KEY 1
5. Select as Type.
PiP
6. Press the
Source
7. Press .
Transform
8. Make sure the
Enable
9. Adjust Top Corner, Bottom Corner, and 2D Size as desired to position
and resize the picture.
10. Press the
Cut [KEY 1]
– or –
Press the or
CUT
– or –
Move the
Transition Lever Arm
Making a PiP in HR mode is basically the same as in SD mode.
Note In HR mode, the Fill source must not be the same as the background source.
In HR mode, there is also the possibility to have a PiP within a PiP.
Find the detailed description in the User Manual.
.
is selected automatically.
is selected.
main menu is selected.
submenu and press
button and select the Fill source from the list.
button is activated.
or button.
Mix [KEY 1]
button.
AUTO
to the opposite position.
INDIGO AV Mixer Quick Start Guide
.
Type