Samsung SGH-X450 Quick Manual page 52

Gprs telephone
Hide thumbs Also See for SGH-X450:
Table of Contents

Advertisement

Phone Settings
Change PIN
(Menu 5.5.2)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
(Menu 5.5.3)
When the Phone Lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
The password is preset to "00000000" at the
factory. To change the phone password, see the
Change Password menu (Menu 5.5.4) below.
Once the correct password has been entered, you
can use the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
Change Password
(Menu 5.5.4)
The Change Password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
The password is preset to "00000000" at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
100
SIM Lock
(Menu 5.5.5)
When the SIM Lock feature is enabled, your phone
only works with the current SIM. You must enter
the SIM lock code.
Once you have entered the lock code, you are
asked to confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock
code.
Privacy
(Menu 5.5.6)
Using this menu, you can lock your contents, such
as mulitmedia messages, memo list, images,
sounds. Once you have locked contents, you must
enter the phone password to access the associated
menus.
To
Press the
select an item to lock Up or Down key. To lock all
of your conents, select All.
place a check mark
Mark soft key.
remove a check mark Unmark soft key.
lock the marked items Ok soft key.
When the phone asks for the phone password,
enter the password and press the OK soft key.
Note: The password is preset to "00000000" at the
factory, To change it, see the Change
Password menu.
Phone Settings
101

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgh-x450csaSgh-x450gsaSgh-x450tba

Table of Contents