Merlin medical MC1 Quick User Manual

QUICK USER GUI

1. Views of the MC 1

3
5
Component
1 Reagent pre-heating stations
2 Cuvette pre-heating stations
3 Rotating measuring cell
4 Graphic display
5 Keys
6 On-/off-switch
7 Low voltage socket
8 Pipette sockets
9 RS 232 interface

2. Installation

 
unpack the system

3. Measurement procedure

Switch on the instrument with the main switch
with:
After the second "beep" press the left
The touch panel is programmed as the sign in the display
5
The system will ask you for
results in sec, percent and the INR. If you answer
percent and also not the INR.
Relase: 010114
1
2
4
function / description
heated stations for pre-heating the reagents
heated stations for pre-heating the cuvettes and also for pipetting the first reagent
position, for adding plasma and start reagent and for measuring the
coagulation time
display of the key plan programme and result presentation
enter-keys of the MC
main switch of the MC 1
for connecting the instrument with the external power supply unit
for the connection with automatic pipettes
connection for external printer or an online-connection
connect the power supply
(step by step)
6
button of the touch panel
"RESULT-CALCULATION" "YES /
"NO"
7
8
3
1; the key function is shown in the above display

connect the pipette and the printer
7
(as far as existing)
on the back side of the instrument. The system will start
5 to start the system.
above the buttons indicates.
4
NO", if you answer
the instrument will not calculate the results in
6
9
&
8
"YES" you will get
© by ABW Medizin und Technik GmbH
9
3