Casio 1353 General Manual

Module No.1353/1361
• Press C to change from mode to mode.
• If the digital display of your watch is continually changing, see "Auto Display function" for information on how to stop it.
1361
A B
C D
The operational procedures for
modules 1353 and 1361 are iden-
tical. All of the illustrations in this
manual show module 1353.
TIMEKEEPING MODE
Note
For the sake of simplicity, the sample displays in this manual do not show the analog
hands of the watch.
About the Timekeeping Mode display
Press D to change the display format in the Timekeeping Mode as shown below.
Format 1
A B
C D
Day of the
Date
week
Month
The following describes the icons that are shown in Format 1 and Format 2 displays.
• All icons that are turned on in the Reminder Mode.
• All icons that are turned on for appointments registered in the Schedule Memo Mode
for the current date. The icon of the next appointment flashes on the display. Icons
automatically disappear from the display when the time for the appointment expires.
• For details on schedules and reminders, see the sections of this manual covering the
Reminder Mode and Schedule Memo Mode.
To set the time and date
1. Make sure that the watch is in the Timekeeping Mode. If not, use C to enter the
Timekeeping Mode.
2. Hold down A while in the Timekeeping Mode until the seconds digits start to flash
on the display. The seconds digits flash because they are selected .
3. Press C to change the selection in the following sequence.
Seconds Hour
Date Month
4. While the seconds digits are selected (flashing), press D to reset the seconds to
"00". If you press D while the seconds count is in the range of 30 to 59, the seconds
are reset to "00" and 1 is added to the minutes. If the seconds count is in the range
of 00 to 29, the minutes count is unchanged.
5. While any other digits (besides seconds) are selected (flashing), press D to increase
the number or B to decrease it. Holding down either button changes the current
number at high speed.
While the 12/24-hour setting is selected, press B or D to switch between two
formats.
6. After you set the time and date, press A to return to the normal Timekeeping Mode
(the flashing stops).
• The day of the week is automatically set in accordance with the date.
• The date can be set within the range of January 1, 1995 to December 31, 2039.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the normal Timekeeping Mode automati-
cally.
Day of the week abbreviations
Day of the week is displayed as shown below.
SUN : Sunday MON : Monday
WED : Wednesday THU : Thursday
SAT : Saturday
About the Reminder signal
Whenever reminder icons are turned on (see "Reminder Mode" for details), all turned
on icons and current time appear on the display for about 20 seconds every hour on the
hour, regardless of what display format the watch is in.
REMINDER MODE
This icon is turned on
Use the Reminder Mode to turn on icons that help
you remember things you have to do. Any reminder
icon you turn on in the Reminder Mode appears on
A B
the Timekeeping Mode's display format 1 and 2 (see
"About the Timekeeping Mode display").
C D
Mode indicator
Current date
Current time
Timekeeping Mode
A B
C D
Format 2 Format 3
Hour
Seconds
Hour hand
Minutes Minute hand
Minutes
12/24-hour
format
Year
TUE : Tuesday
FRI : Friday
• Whenever you enter the Reminder Mode, all of the
available icons appear. The icons that are turned
on flash.
GENERAL GUIDE
Reminder Mode
C
Hand Setting Mode
C
About icons
The following table shows the icons used by this watch.
Icon
Don't forget!
Meeting
Travel
Payment/Receipt
Sports
To turn an icon on and off
A
ON/OFF
C
On/off status
• The on/off status of the selected icon is shown on the display as "On" and "OFF".
4. Press B to turn an icon on and off.
5. Repeat steps 3 and 4 to turn other icons on and off.
6. Press C to exit the Reminder Mode.
• The following shows how the display automatically changes if you do not operate
any button for a few minutes while in the Reminder Mode.
Reminder icon selected
(high-speed flashing)
To turn all Reminder Mode icons off
In the Reminder Mode, press B and D at the same time to turn all Reminder Mode
icons off.
The Telememo Mode lets you store up to 50* pairs of name and telephone number
data. The name can be up to 8 characters long and the numbers 12 digits each. Data
is automatically sorted into alphabetical order based on the name data. You can recall
data by scrolling through a sorted list.
* The Telememo Mode shares memory with the Schedule Memo Mode. This means
that the maximum number of Telememo Mode entries you can store is reduced each
time you store data in the Schedule Memo Mode.
To input Telememo data
A
Mode
indicator
C
Remaining memory capacity (number of items)
1. Make sure that the watch is in the Telememo Mode. If not, use C to enter the
Telememo Mode.
• Whenever you enter the Telememo Mode, the display shows how many items are
already stored in memory and how many items you can input before memory becomes
full. After a few seconds, the display changes to show the item that was selected
when you last exited the Telememo Mode.
Telememo Mode Schedule Memo Mode
C C
Stopwatch Mode
C C
Meaning
Icon
1. Make sure that the watch is in the Reminder Mode.
If not, use C to enter the Reminder Mode.
B
2. Press D and the
icon flashes at high speed on
the display because it is currently selected. Also,
any icons that are turned on flash, at a somewhat
slower speed.
3. Use D to select the icon you want. Each press of
D
D moves the high-speed flashing (selection) in
the following sequence.
The high speed flashing stops
Normal Reminder Mode
A few
(high-speed flashing stops)
minutes
TELEMEMO MODE
B
D
Number of items in memory
1353/1361-1
C
Alarm Mode
Meaning
Telephone call
Gift/Anniversary
Documentation
Dining
Music
Timekeeping
A few
Mode
minutes
Name
Telephone number