Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Wessex Country SAK 100
- Page 1 ROTARY CULTIVATOR OPERATOR'S MANUAL AND PARTS LIST...
- Page 2 SAK Tillers Operator's Manual TILLERS SAK 100. SAK 120. Page 1 of 23...
- Page 3 SAK Tillers Dealer’s Stamp No part of this manual shall be reproduced, copied or disseminated by any means, without Wessex Machinery Sales prior authorization in writing. Wessex Machinery Sales reserves the right to make any necessary changes without giving prior notice, in order to optimize the quality and safety features and does not commit itself to updating this manual every time a change is made.
- Page 4 SAK Tillers INDEX GENERAL INFORMATION Symbols Page 5 Safety Labels Page 6 Technical date Page 7 Main Parts terminology Page 7 Identification Plates Page 8 Recommended Use Page 8 Inappropriate Use Page 8 ...
- Page 5 SAK Tillers Page 4 of 23...
-
Page 6: Safety Labels
SAK Tillers SAFETY LABELS The safety labels and information on the machine (picture 1, 2 and 3), must be complied with. Failure to comply with these warnings may result in severe injuries or even death. Make sure that the labels are always present and legible; should this not be the case, contact your nearest dealer to request replacements. -
Page 7: Main Parts Terminology
SAK Tillers TECHNICAL DATA MAIN PARTS TERMINOLOGY Page 6 of 23... -
Page 8: Identification Plates
SAK Tillers IDENTIFICATION PLATES The identification plates are placed on all the tillers and are structured as follows: MODEL: 8833048 YEAR OF MANUFACTURE: 2007 WEIGHT: 286 lbs SERIAL NUMBER: 0000000000001 Broadwood International Trading Estate, Oakhanger Road, Bordon Hampshire GU35 9HH T: 01420 478111 F: 01420 483000 E: info@broadwoodintl.co.uk... -
Page 9: Safety In The Workplace
SAK Tillers SAFETY SAFETY IN THE WORKPLACE Most of the accidents, which occur while the operator is using the machine or the equipment or carrying out maintenance and repair activities, are caused by the non-compliance with the main safety requirements. Therefore the potential risks must be fully understood and special attention must be paid to the activity which is being executed. - Page 10 SAK Tillers Prepare the work: • Do not drink alcohol; take drugs, or any other substances which may affect your ability to use the equipment before or when working. • Make sure that there is sufficient fuel in the tractor to prevent the machine from stopping during work. •...
-
Page 11: Attachment To The Tractor
SAK Tillers Wessex Machinery Sales shall not assume any responsibilities if these instructions are not strictly followed. SETUP ATTACHMENT TO THE TRACTOR Carefully read this instruction manual and the manuals of the tractor and PTO shaft manufacturer. All tillers are built to be attached to any tractor equipped with a three point lift of the correct category and with suitable ball ends. -
Page 12: Connection Of The Pto Shaft
SAK Tillers CONNECTION OF THE PTO SHAFT Before installing the PTO shaft make sure that the RPM rating and the direction of rotation match those of the tractor. Carefully read the PTO shaft and tractor instructions. Furthermore, accurately read the instructions of the manufacturer of the PTO shaft and of the tractor. -
Page 13: Working Depth Adjustment
SAK Tillers WORKING DEPTH ADJUSTMENT The working depth of the equipment depends on the position of the lateral skids. If the skids are raised, the working depth increases; if the skids are lowered, the working depth decreases. Make sure that the skids are set at the same height on both sides. To adjust the working depth on the SAK tillers loosen and remove nut A (picture 4) and adjust the skid height according to the holes B. -
Page 14: Chain Adjuster
SAK Tillers CHAIN ADJUSTER The SAK tillers are equipped with a chain drive (picture 6). The chain adjustment is made during assembly; any adjustments when using the machines, must be carried out by an authorised dealer or work shop. START UP After carrying out these adjustments, the equipment is ready for use. -
Page 15: Maintenance
SAK Tillers MAINTENANCE Maintenance is crucial for the working life and efficiency of any agricultural equipment. If the equipment is properly maintained and operated, a long working life and operator safety are assured. The maintenance intervals indicated in this booklet are provided as a mere reference and are related to normal working conditions;... -
Page 16: First Check
SAK Tillers FIRST CHECK • After 50 working hours, change the oil in the gearbox and make sure that all the screws and bolts are tightened. EVERY 8 WORKING HOURS • Grease the rotor support through the grease nipple A (picture 7). •... -
Page 17: Blades Replacement
SAK Tillers BLADE REPLACEMENT To assure the optimum efficiency of the machine, make sure that the tiller blades are in a good working condition and that their bolts are tightened; replace them if they are broken or bent. The new parts must be installed in the original position. Before replacing the blades, turn the tractor engine off, pull the parking brake, disengage the power take off, raise the tiller using the tractor lift, and install supports to prevent accidental dropping of the... - Page 18 SAK Tillers HOW TO ORDER SPARE PARTS For spare parts requests please refer to our spare parts catalogue. The spare parts can be ordered from the dealer or service centre. The following data must always be specified: • Equipment type and width. •...
- Page 19 SAK Tillers Type: ROTARY TILLER Mod: SAK 100 (Offset Model) – SAK 120 Rev: 00/2005 Tab: 1/1 Page 18 of 23...
- Page 20 SAK Tillers ITEM SIGMA P/N POS. COD. SICMA DESCRIZIONE DESCRIPTION Q.TA 6351004 COPIGLIAAD"R"D.4 COTTER PIN $4 4301589 PERNO 3° PUNTO SUPERIORS 4002816 CASTELLO 3° PUNTO SUPERIORS BRACKET 31510035 VITE UNI 5739 M10x35 8.8 ZO SCREW UNI 5739 M10X35 8.8 4232801 PERNO COPERCHIO SAK 100 DEC.
- Page 21 SAK Tillers 4001123 SLITTA DX RIGHT SKID 6204062 PARAOLIO 40x62x10 PP OIL SEAL 40x62x10 PP 4781622 GUARNIZIONE SUPPORTO CUSCINETTO BEARING SUPPORT GASKET 4701624 SUPPORTO CUSCINETTO ROTORE BEARING SUPPORT 4002805 ROTORE PORTAZAPPE SAK 100 DEC. (4 FLANGE) ROTOR SAK 1 00 OFFSET MOD. (# 4 FLANGES) 4002806 ROTORE PORTAZAPPE SAK 120 (5 FLANGE) ROTOR SAK 120 (# 5 FLANGES)
- Page 22 SAK Tillers SAFETY LABELS ATTENTION: Description Do not use without PTO Never remove guards or of pictograms. shaft guard. attempt adjustment until rotor has stopped. Read operating manual Ear defenders must be Bystanders must be at before use. worn. least 20 metres from machine range of action.
- Page 23 SAK Tillers Protective eyewear, ATTENTION: Description Read operating manual footwear, gloves and ear of pictograms. before use. protectors must be worn. Page 22 of 23...
Need help?
Do you have a question about the Country SAK 100 and is the answer not in the manual?
Questions and answers