Table of Contents
Advertisement
Quick Links
ASSEMBLY AND INSTALLATION
356-4027
WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Customer Service: 1-800-887-6326 (weekdays 9 a.m. – 5 p.m. CST)
3. READ AND SAVE THESE INSTRUCTIONS.
Important to Know
1. Read all instructions carefully before installation
and operation.
2. If you are not familiar with state and local electrical
codes, it is recommended that you consult with a
qualified electrician.
3. Before installation, shut off power at the main fuse
or circuit breaker box. Be aware that simply turning
off the wall switch is not sufficient to prevent
an electrical shock.
4. This fixture requires a 120 VAC, 60 Hz power
source. Maximum wattage is 60W per socket.
5. Do not attempt to take the lantern apart; there are
no serviceable parts inside.
6. To avoid sensor damage by lighting or electrical
surge, make sure the grounding wire is
securely connected.
7. For general safety and to avoid any possible
damage to the sensor, be sure the power is
switched "off" before replacing the bulb.
Maximum Wattage: 1x60W
Cross Bar
Lock Nut
Outlet Box
Green Grounding Screw
House Grounding Wire
Fixture Grounding Wire
INSTRUCTIONS
Headless Screw
Fixture Wire
Wire Nut
Back Plate
Bulb Type A Max.60W
(not included)
Features
1. The motion be detected only at night.
2. Light will turn off automatically after motion is
no longer detected.
3. PC' Mode provides illumination from dusk
to dawn.
4. When in manual override mode, use wall
switch to keep the light ON all night long.
Hardware Package:
1 SET
Rubber Pad
Ball Nut
Main Fixture
130910
Advertisement
Table of Contents
Related Manuals for Patriot Lighting 130910
Summary of Contents for Patriot Lighting 130910
- Page 1 "off" before replacing the bulb. Maximum Wattage: 1x60W Rubber Pad Ball Nut Cross Bar Headless Screw Lock Nut Fixture Wire Outlet Box Main Fixture Wire Nut Green Grounding Screw House Grounding Wire Fixture Grounding Wire Back Plate Bulb Type A Max.60W (not included) 130910...
- Page 2 (100% brightness) when motion is detected, and stay on as long as the motion is continuing. When the motion stops, the light will remain on for the predetermined time as you set (5 ~ 180 seconds), and then revert to low level brightness. Light will turn off automatically at dawn. 130910...
- Page 3 5. The sensor will be more sensitive to motion across its detection path than motion directly towards it. 6. To reduce possible nuisances, do not mount the fixture near a heat source like an air conditioner, vent or furnace exhaust, or in a direction facing any reflecting object or other light source. 130910...
-
Page 4: Troubleshooting
This warranty excludes coverage of finish or color against tarnishing, flaking, and discoloration. If the original purchaser ceases to own the Patriot Lighting product this warranty and any implied warranty will be void. This warranty does not cover damage caused by misuse or abuse, including but not limited to improper installation, improper usage, accident, negligence, unauthorized repair, unauthorized modifications, or unauthorized maintenance of the fixture.
Need help?
Do you have a question about the 130910 and is the answer not in the manual?
Questions and answers