Advertisement
Quick Links
Arm and Back Height Adjustment -
available option on all ORA chairs
To adjust arm or back height
• Pull upward until
mechanism is extended
to its maximum height.
This engages the internal
ratchet.
• Push downward to
lower mechanism to its
minumum height
• Slowly pull upward to
adjust to the desired
height
Note: Each time an
adjustment is made,
the mechanism MUST
be pulled upward to the
maximum height, then
pushed downward to the
minumum height starting
point.
HARDEN FURNITURE, INC.
8550 Mill Pond Way, McConnellsville, New York 13401
315 / 675-3600 Fax 315 / 245-2884 contract@harden.com
www.hardencontract.com
MADE IN USA
• Loosen knob located at
base of arm
• Pull arm outwards to
desired width
• Tighten knob to keep arm
in place
2 1/4" max.
2 1/2" max.
2" max.
RA
Collection
USER'S MANUAL
Advertisement
Summary of Contents for HARDEN contract ORA C1809-100
- Page 1 Arm and Back Height Adjustment - available option on all ORA chairs To adjust arm or back height • Loosen knob located at base of arm • Pull upward until mechanism is extended • Pull arm outwards to to its maximum height. desired width This engages the internal •...
- Page 2 Synchro Tilt Mechanism - for chair models: Harden has designed this chair with some revolutionary C1809-100 / C1810-100 / C1909-100 / C1910-100 design features that require some quick adjustments for maximum effect. TECHNICAL DATA: Please take a moment to review this card and then store in •...