Zte AD8000 Manual page 10

Making WIFI Connection
(1) Go on the Home screen, tap on the Menu icon
"Settings".
(2) In the "Settings" screen, select "Wireless & Networks".
(3) If the WiFi is off, tap on the "Wi-Fi" setting to turn it on. Then select "Wi-Fi
settings". Your MID will scan automatically for available WiFi networks
and display them. The list of available networks shows all the wireless
networks in range of your device.
- The list is constantly refreshed automatically.
- When the WiFi is enabled, Your MID will connect automatically to your
configured networks when they are in range.
- If Your MID finds a network that has never been configured, it will display
a notification icon.
(4) Tap on the network you want to connect to, enter the required network
information (password) and then tap on "Connect". Your MID will now
attempt to establish a connection to that WiFi hot spot with the network
parameters you entered. If the connection is successful, the message
Connected to XXX will appear under the WIFI setting.
Note:
a) The available network list is constantly refreshed automatically.
b) When the Wi-Fi is enabled, Your MID will connect automatically to your configured
networks when they are in range.
c) If Your MID finds a network that has never been configured, it will display a notification
icon.
Advanced Connection
To manually scan for available Wi-Fi networks,
(1) In the "Wi-Fi settings" screen, tap on the Menu icon
"Scan".
(2) If the Wi-Fi network you want to connect to does not appear in the list, scroll
down the screen, then tap on "Add a Wi-Fi network". Enter the required
settings, then tap on "Save".
To access the advanced network parameters ("Regulatory domain", "IP
address", etc), tap on the Menu icon
parameters will appear. The required information can be obtained from the
person who manages the network.
and then select
, and then tap on
, and then tap on "Advanced". Other
10