Universal Furniture 988628-RTA Assembly Instruction

Assembly Instruction
________________________________________________
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small
parts that may have come loose inside the carton during shipment.
Caution:
(1) This product can best be assembled with the assistance of one person in order to prevent personal
injury and to ensure parts are not damaged during the assembly process. If dirty, clean finished parts
with mild dishwashing liquid and water solution applied on damp cloth. Cloth should not be
excessively wet. Polish finish with soft cloth and an industry recognized furniture polish.
(2) To prevent damage to your floor or carpet, please check the bottom of each piece of furniture for
stain residue and rough surfaces and also check for staples or nails left after removing the packaging
material. The manufacturer will not be held responsible if preventive steps are not taken prior to
installation.
(3) Unpack and dispose of all packing material but be careful not to throw away assembled parts or
hardware. Read the instruction sheet and parts list carefully. Remove all staples and screws used for
packaging carefully using pliers and or screwdrivers to prevent injury and scratching or damaging
flooring.
(4) During normal every day, screws, bolts, nuts and wooden plugs may loosen up. They should be
periodically inspected and re-tightened to prevent damage to the furniture and (or) personal property or
cause injury. Always check to be sure all hardware on this list and the above mentioned components is
attached to the furniture properly and kept tightened at all times.
PAGE 1 OF 2
Model #: 988628-RTA Woven Dining Chair