Advertisement
DISCLAMER: Emton Pty Ltd, Trading as Microtec Engineering, do not take any responsibility for
any damage caused installing this product
MICROTEC ENGINEERING
EXTERNAL WARNING LIGHT
INSTALLATION INSTRUCTIONS
ESTIMATED TIME OF INSTALLATION: 3 HOURS
C:\Work\Microtec\Website\website\Documentation- External\External Warning Lights-Instructions\Robway 1502\Robway
1502.doc
ROBWAY 1502
1/4
Advertisement
Table of Contents
Summary of Contents for Microtec ROBWAY 1502
- Page 1 DISCLAMER: Emton Pty Ltd, Trading as Microtec Engineering, do not take any responsibility for any damage caused installing this product MICROTEC ENGINEERING EXTERNAL WARNING LIGHT INSTALLATION INSTRUCTIONS ROBWAY 1502 ESTIMATED TIME OF INSTALLATION: 3 HOURS C:\Work\Microtec\Website\website\Documentation- External\External Warning Lights-Instructions\Robway 1502\Robway...
- Page 2 O/R. Then turn the over-ride switch and confirm all unsafe functions are operational. Beware: Autostop functions will not operate during over-ride. Should any of these tests fail call Microtec for service INSTALLATION OF INPUTS PREINSTALLATION PREPARATION 1. Isolate batteries during installation with isolator switch.
- Page 3 Use ferrule crimps provided to make core cable may be cut the connections to the activation box. off from the loom. You may also need to shorten the length of the ferrules so the lid can close easily. C:\Work\Microtec\Website\website\Documentation- External\External Warning Lights-Instructions\Robway 1502\Robway 1502.doc...
- Page 4 (shown in the connection diagram below). Connect the black wire of the loom to the blue wire from the terminal strip. Located 2 terminal from the right (shown in the connection diagram below). C:\Work\Microtec\Website\website\Documentation- External\External Warning Lights-Instructions\Robway 1502\Robway 1502.doc...
Need help?
Do you have a question about the ROBWAY 1502 and is the answer not in the manual?
Questions and answers