Table of Contents
Advertisement
- Profile name: assign a name to the MMS
profile.
- Server URL: enter the address of your
MMS server.
- Proxy: connect to the GPRS network using
the proxy server.
- GPRS settings: customise the settings
required for connecting to the GPRS
network.
When the proxy is set to Enable:
IP address: enter the gateway address.
Port: enter the port number.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
when the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
- Version: select an available OMA version
and maximum size limit for sending or
receiving messages.
Depending on your service provider, it
may not be possible to support the
maximum limit 300KB. In this case, try
again after changing the setting to 100KB.
• Block number: specify phone numbers
from which messages will not be accepted.
Numbers specified here are also included in
the SMS blocking list.
• Message class: select the type of message
content you will add or the message size.
Text only: you can add only text of up to 30
KB.
79
Advertisement
Table of Contents
