Advertisement
Precision manufactured using aircraft quality T-304 stainless steel; this system is designed to endure years of heavy use.
Installing a Borla Performance Exhaust System on your vehicle will eliminate the restrictive design of the stock exhaust,
allowing your engine to discharge exhaust gas easier. The result is more horsepower and torque, longer engine life, and a
distinctive throaty growl- all this, with easy bolt-on installation. These installation instructions have been written to help you in
the installation of your Borla Performance Exhaust System. Please read it completely before installing your system.
Thank you for purchasing a Borla Performance Cat-Back™ Exhaust System.
Borla Performance Cat-Back™ Exhaust System (Part number 140256) has been designed for the
2007-2008 Chevy/GMC 2500/3500 equipped with a 6.6L diesel engine, Crew Cab, Extended Cab or
Regular Cab, Short Bed or Long Bed, two and four-wheel drive and automatic or manual
transmissions.
Borla Performance Industries recommends that an exhaust shop or professional after market parts installer, who has all the necessary
equipment, tools and experienced personnel needed for proper installation, should perform the installation of this system. However,
if you decide to perform the installation, we recommend someone should help you. Ensure the installer uses all under car safety
precautions including eye protection.
Please take time to read and understand the following...
By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms
stated below.
It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your
Borla Performance Exhaust System
Borla Performance Industries assumes no responsibility for damages occurring from misuse, abuse, improper installation, improper
operation, lack of responsible care, or all previously stated reasons resulting from incompatibility with other manufacturer's
products and/or systems.
Included with your Borla Performance Exhaust System is a warranty card. Please read it carefully before you begin any work on
your vehicle. If you should have any questions regarding our warranty policy, installation, or any other matter pertaining to your
new Borla Performance Exhaust System, please give us a call at the number provided on the warranty card.
TITLE: 2007-2008 Chevy/GMC 2500/3500
Diesel Installation Instructions
Exhaust System Installation For
2007-2008 Chevy/GMC 2500/3500
PART NO. A-35418
BORLA PERFORMANCE INDUSTRIES
5901 Edison Dr.
Oxnard, Ca. 93033
Page 1 of 4
805-986-8600
Advertisement
Table of Contents
Related Manuals for BORLA Cat-Back 140256
Summary of Contents for BORLA Cat-Back 140256
- Page 1 Please take time to read and understand the following… By installing your Borla Performance Exhaust System, you indicate that you have read this document and you agree with the terms stated below. It is the responsibility of the purchaser to follow all installation instruction guidelines and safety procedures supplied with your...
- Page 2 2 3/8” Drive Extension 3” 3 15mm Socket 4 Pry Bar SHOP SUPPLIES: 1 Spray Lubricant Borla Performance Cat-Back™ Bill of Materials 1. Front pipe assembly 2. Tail pipe assembly 3. 4.00” clamp 4. Bolt (qty 3) 5. Nut (qty 3) 6.
- Page 3 1 hour. Always wear eye protection when working under any vehicle. Note: It is our recommendation that you use a hoist or hydraulic lift to facilitate the installation of your new Borla Performance ™...
- Page 4 Figure 3 Note: When you first start your vehicle after the installation of your new Borla Performance Exhaust System, there may be some smoke and fumes coming from the system. This is a protective oil based coating used in the manufacturing of mandrel bent performance exhaust tubing.
Need help?
Do you have a question about the Cat-Back 140256 and is the answer not in the manual?
Questions and answers