Illumination - Samsung SGH-A867 User Manual

Transition Effect
Allows you to activate/deactivate the default transition effect
(wipe) during transitions between menu/options pages.
From Idle mode, touch
1.
➔
Light Transition Effect.
Touch either On (activate) or Off (deactivate).
2.
LCD Brightness
Allows you to adjust the display brightness for the LCD to see
better within different lighting conditions.
From Idle mode, touch
1.
➔
Light Brightness.
2. Touch and drag the Level slider to the brightness level you
desire (range is 1-5).
– or –
Touch either On or Off (from within the Automatic field) to
also allow the phone to use its light sensors to
automatically adjust the LCD brightness.
Save
Touch .
3.
Note: Modifying this setting will impact your battery life.
59
➔ ➔
Settings Display and
➔ ➔
Settings Display and
Backlight Time
The backlight turns the screen on using a preset brightness level.
When the time (set in this feature) runs out, the touch screen
locks. For more information, refer to "Locking and Unlocking the
Phone" on page 19.
1. From Idle mode, touch
➔
Light Backlight Time.
Touch one of the backlight times to set the amount of time
2.
the phone's touchscreen remains lit without activity.
Options include: 8 Seconds, 15 Seconds, 30 Seconds,
1 Minute, 3 Minutes, or 10 Minutes).
Touch Save .
3.
Note: Modifying this setting will impact your battery life.

Illumination

This menu allows you to activate the lighting effect emitted by
the phone when a certain event occurs. When active, this feature
flashes a strip of color along the bottom of the phone once an
event condition (such as incoming call, message, alarm, and
turning the phone on/off) is met.
➔ ➔
Settings Display and