Download Print this page

Scott Flowhood 2 Instructions For Use Manual

Hide thumbs Also See for Flowhood 2:

Download this manual

Flowhood 1 & 2

Instructions for Use

ENGLISH

009738-E 05/2010

Page 1 Flowhood 1 & 2 Instructions for Use ENGLISH 009738-E 05/2010...
Page 2 FL 1 ML 064280 FL 2 064282 FL 2 A/S 064283 FL2 SU 064670 FL 1 SM 064281 (antistatic) (single use) BGIA, DE-53754 Sankt Augustin, Germany Australia Russia (excluding FL2 SU)
Page 3: Warranty
The warranty period runs from the date of purchase by the end user. These products are warranted to be free from defects in materials and workmanship at the time of delivery. Scott will be under no liability for any defect arising from wilful damage, negligence, abnormal working conditions, failure to follow the original manufacturers instructions, misuse or unauthorised alteration or repair.
Page 4 064670 Flowhood 2 SU (full hood, single use) 1. General The Flowhood 1 and Flowhood 2 is designed to protect the respiratory system and face against hazardous gases and particles. Use with a blower device, with the filters fitted to the blower device.
Page 5 Undo the nut found on the rear innerhood (with Flowhood 2, also remove the plastic washer) and remove the hose. Insert the new hose into the hood (with Flowhood 2, also fit the washer) and tighten the nut. Check that both layers of hood fabric are trapped under the nut.
Page 6 Scott Health & Safety Oy P.O.BOX 501 FI-65101 Vaasa, Finland TECHNICAL SUPPORT & SALES Tel. +358 (0)6 3244 543 or 544 or 535 TEKNINEN TUKI JA MYYNTI Puh. (06) 3244 536 tai 537 Fax +358 (0)6 3244 591 scott.sales.fin@tycoint.com www.scotthealthsafety.com...

Flowhood 1