Subscribe to Our Youtube Channel
Summary of Contents for Sur-Pro DOUBLE SIDED QUADLOCK STILTS
- Page 1 PARTS, ASSEMBLY AND SAFETY MANUAL DOUBLE SIDED QUADLOCK STILTS PLEASE READ CAREFULLY BEFORE ASSEMBLY OR USE Ver 18.01...
-
Page 2: Table Of Contents
Maintenance Instruc�ons Cleaning .................. 11 Lubrica�on ................11 Replacement Parts ..............11 Replacement Parts Diagram ............12 Replacement Parts & Kits ............13, 14 Warranty Sur-Pro One-Year Limited Warranty ........15 Sur-Pro Product Registra�on ........... 16 Warranty Service ..............16... -
Page 3: About
ABOUT Sur-Pro stilts are designed and manufactured for use in the commericial drywall and construction industry. Sur-Pro stilts are NOT designed for recreational use or use as a performance prop. Proper assembly, inspection, and maintenance are required every time before use. New users need to learn safe and proper walking technique before using the stilts at a jobsite. -
Page 4: Warnings And Safety Precau�Ons
• Always inspect your stilts prior to every use. Check for worn or damaged parts and always replace with genuine Sur-Pro parts. Check and tighten all nuts and bolts, but do not over-tighten any loose nuts, wing bolts, or screws. The Forest Group, Inc. is not responsible for any equipment failures if non-genuine Sur-Pro parts are used. -
Page 5: Your Box Includes
Descrip�on Part # Le� main s�lt body Right main s�lt body Double sided Sur-Pro le� side pole with leg band SS1010L SS1010R Double sided Sur-Pro right side pole with leg band Side pole bolts 1 ¾" with washers and nuts H132W Heel cups with nuts and screws a�ached... -
Page 6: Arch & Toe Strap Posi�Ons
STILT ASSEMBLY ARCH & TOE STRAP POSITIONS The straps come pre-installed. Use the following instructions to adjust or replace the straps. The leg band straps should be tightened by pulling away from the stilt. The toe and arch straps are tightened by pulling toward the inside of the stilt. -
Page 7: Toe Strap Installa�On
STILT ASSEMBLY Option 2 To wear the arch strap in option 2, remove the side pole clamp bracket rst. Thread the strap through foot plate. Secure the strap in place with the screws and washers. TOE STRAP INSTALLATION nstall the toe strap the same way as the arch strap (Option 2). -
Page 8: Double Sided Pole Installa�On
STILT ASSEMBLY DOUBLE SIDED POLE INSTALLATION Insert the right and left side poles (H165W- XXXP) into the brackets on the main stilt body. The opening on the legband should face the toe of the stilt. Secure with 1½" bolt, two washers and nylon locknut. (H124W) Line up side pole holders with the side pole clamps and secure with 1¾"... -
Page 9: S�Lt Height
STILT ADJUSTMENTS STILT HEIGHT To adjust the height of the stilts, remove the wing bolts (H142) from the stilts. Slide vertically to desired height. Align the holes in the outer extrusion to those of the inner leg extension. Reinstall the wing bolts at the desired height. Hand-tighten the wing bolts. -
Page 10: Learning To Walk
LEARNING TO WALK WARNING: Find a level, clean oor free of any tripping hazards to practice walking for the rst time. Avoid openings such as doorways, oor vents, stairwells or windows that you can fall through. A messy jobsite is NOT the right place. WALKING INSTRUCTIONS •... -
Page 11: Maintenance Instruc�Ons
1-888-443-8889 for genuine Sur-Pro replacement parts. The Forest Group, Inc. is not responsible for any equipment failures if non-genuine Sur-Pro replacement parts are installed or if the stilt is dismantled and the components are not installed correctly. -
Page 12: Replacement Parts Diagram
REPLACEMENT PARTS DIAGRAM SS1010L/R HP107W H110W H173 H108W H164BK H109 H131S H127W H132W H127W H145 H165W - XXXP H142 H165W - XXXP H124W H142 H151W-XXAP H124W H151W-XXAP H127W HP107FW - Optional 1½ " Wide Arch Strap H127W H126R... -
Page 13: Replacement Parts & Kits
Sur-Pro s�lts Strap Dimensions: 1" width, 17" length Replacement nylon foot plate for all Sur-Pro s�lts H109 Replacement adjustable heel bracket aluminum with screws for all Sur-Pro s�lts H110W Replacement bolt with washers and locknut Dimensions: 1 ½" in length H124W Replacement rubber floor plate for all Sur-Pro s�lts... -
Page 14: Replacement Parts & Kits
REPLACEMENT PARTS & KITS Item Descrip�on Le� leg band kit for double sided Sur-Pro s�lts • Replacement le� leg band (count 1) • Replacement leg band strap (count 1) Dimensions: 1 ½" width, 10 ½" length SS1010L • Replacement bolts with washers and nuts (count 2) Dimensions: 1 ½"... -
Page 15: Warranty
The Forest Group, Inc. does not cover damage incurred by • misuse of the product. In particular, Sur-Pro stilts are designed and intended for use in the construction and drywall industries and are not designed for use as a recreational or performance prop. -
Page 16: Sur-Pro Product Registra�On
WARRANTY Sur-Pro Product Registration ® We strongly encourage you to register your Sur-Pro products. Answering the registration questions and uploading proof of purchase expedites access to warranty services and gives you easy access to manuals, parts and documentation. To register your products, please: Visit www.stilts.com and ll out the online Product...
Need help?
Do you have a question about the DOUBLE SIDED QUADLOCK STILTS and is the answer not in the manual?
Questions and answers