Page 2
INSTALLATION INSTRUCTIONS VOLT Gentle Splash Flood Light ® VFL-430-4-BBZ Important: Please Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Package Contents A. (1) Stake B. (1) Luminaire Product Dimensions 4” 2” 1.5” Install Stake Determine the desired location for mounting Board the luminaire. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of stake while hammering.
Page 4
INSTALLATION INSTRUCTIONS VOLT Gentle Splash Flood Light ® VFL-430-4-BBZ Remove Cover and Gasket with Lens Socket Lock Screw Cover Luminaire Gasket with Lens Unscrew the lock screws and remove the cover and gasket with the lens from the luminaire to expose the socket.
Page 5
Install Luminaire to Stake Clear away an area in the ground at the wireway slot on top of the Luminaire stake. Lay the luminaire pigtail Wireway Slot into the wireway slot and screw the Hex Nut fixture on to the stake. Tighten the hex nut on the luminaire against the Pigtail stake and tighten until snug.
Need help?
Do you have a question about the Low Voltage Landscape Lighting and is the answer not in the manual?
Questions and answers