Table of Contents
Advertisement
Quick Links
Description
The DMP V-4404A 4-Channel Analog Converter is a
useful security tool when connected to residential
and commercial security systems. Adding analog/
HD TVI cameras to the converter provides
businesses and homeowners with the ability to
visually check their premises at any time. It also
allows central station operators to have access to
live and recorded video when verifying an alarm.
Prior to use, it is necessary to activate the converter
and cameras by logging in to a dealer account at
dealeradmin.securecomwireless.com and entering the
serial number.
Compatibility
• Analog cameras
• HD-TVI cameras
Installing the 4-Channel Analog Converter
The 4-Channel Analog Converter is designed for convenient plug-and-play installation. It is possible to connect a
maximum of four cameras to the Converter.
Establish a Connection
1
Before installation of the Converter, establish a connection between the Converter and the Internet via the
LAN interface. Place the Converter in a location safe from liquid spills that is well ventilated and dust-free.
Add Analog Cameras
2
Each camera requires a dedicated cable from the camera to one of the four Video In BNC connectors on
the back panel of the Converter. The Video In connectors are numbered 1 through 4 and designate the four
channels that are available for the cameras.
For example: Camera 1 should be connected to BNC connector 1, Camera 2 should be connected to BNC
connector 2, etc.
Understanding the Back of the Converter
Below, is a short description of each connection on the back side of the V-4404A 4-Channel Converter.
VGA Interface
Connection to monitor for
viewing the camera output.
Video IN Connector
Connect up to four analog
cameras to the converter
using BNC connectors.
USB Port
Allows a USB mouse or
keyboard to connect to
the Converter.
INST ALLA TION GUIDE
V-4404A 4-Channel Analog Converter
Audio IN & Out Connectors
Audio In and Audio Out are not
available at this time.
Figure 2: Rear Panel
HDMI Interface
Plug one end of an HDMI
cable into a TV or monitor.
Connect the other end to the
Converter for camera viewing.
Figure 1: Front View - V-4404A 4-Channel
Analog Converter
What is Included
• V-4404A 4-Channel Analog Converter
• 12V Power Transformer
RS-485 Interface
RS-485 Interface is not
available at this time.
LAN Network Interface
Plug one end of the included
network cable into the
Converter LAN port. Plug the
other end into the network
LAN/WAN connection.
Power Switch
For turning on or
off the Converter.
12V dc Power Supply
Attach the power supply
connector here and plug the
other end into an electrical
outlet that is not controlled
by a wall switch.
Advertisement
Table of Contents
Summary of Contents for DMP Electronics V-4404A
- Page 1 For example: Camera 1 should be connected to BNC connector 1, Camera 2 should be connected to BNC connector 2, etc. Understanding the Back of the Converter Below, is a short description of each connection on the back side of the V-4404A 4-Channel Converter. VGA Interface Audio IN & Out Connectors...
- Page 2 Understanding the Front of the Converter Below, is a short description of each LED on the front of the V-4404A 4-Channel Converter, as well as the USB port. Status LED Tx/Rx LED The indicator displays Red when The indicator shows data is being read to or from the network activity.
Need help?
Do you have a question about the V-4404A and is the answer not in the manual?
Questions and answers