Samsung SGH-zx10 Series User Manual page 158

Template.book Page 158 Wednesday, December 28, 2005 7:02 PM
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code to unlock the SIM so you can use a different SIM card.
Once you have entered the lock code, you are asked to
confirm your entry.
PIN Lock
When the PIN Lock feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person does not have your PIN cannot
use your phone without your approval.
Note: Before disabling the PIN Lock feature, you must enter your PIN.
The following options are available:
•
Enable: you must enter the PIN each time the phone is
switched on.
•
Disable: the phone connects directly to the network when you
switch it on.
Fixed Dialing Mode (SIM Dependent)
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
•
Enable: you can only call phone numbers stored in the Address
Book. You must enter your PIN2.
•
Disable: you can call any number
158