Advertisement
Quick Links
Advertisement
Related Manuals for Sitecom CN-104v2
Summary of Contents for Sitecom CN-104v2
- Page 1 USB to Serial Cable CN-104v2 Quick Start Guide...
-
Page 2: System Requirements
Introduction This product converts an USB 1.1 interface to a serial interface. New PC’s often don’t have RS232 ports. The Universal Serial Bus (USB) is getting more and more popular and the traditional RS232 port is disappearing. This product provides the conversion between USB and RS232. - Page 3 • Select 'Specify a location', fill in E:\drivers\win98SE (if E: is your CD-ROM) and click 'Next'. You can also use the 'Browse' button to select the proper location of the drivers. • Windows will detect the driver. Click 'Next'. • Click 'Finish' to complete the installation of the USB to Serial cable.
- Page 4 • Check the device manager to see if the Sitecom USB to Serial cable is installed correctly. The cable is installed under 'Ports' and 'USB Controllers'. Installation Windows ME • Plug the USB connector of the USB to Serial cable in a free USB port. Windows will detect new hardware.
- Page 5 Windows will detect the driver. Click 'Next'. • Click 'Finish' to complete the installation of the USB to Serial cable. • Check the device manager to see if the Sitecom USB to Serial cable is installed correctly. The cable is installed under 'Ports' and 'USB Controllers'.
-
Page 6: Installation Windows 2000
Installation Windows 2000 • Plug the USB connector of the USB to Serial cable in a free USB port. Windows will detect new hardware. Click 'Next' to continue. • Select 'Search for a suitable driver for my device (recommended)' and click 'Next'. - Page 7 • Select 'Specify a location' and click 'Next'. • Fill in E:\drivers\win2000 (if E: is your CD-ROM) and click 'Next'. You can also use the 'Browse' button to select the proper location of the drivers. • Windows will detect the driver. Click 'Next'. •...
-
Page 8: Installation Windows Xp
• Check the device manager to see if the Sitecom USB to Serial cable is installed correctly. The cable is installed under 'Ports'. Installation Windows XP • Plug the USB connector of the USB to Serial cable in a free USB port. Windows will detect new hardware. - Page 9 Click 'Continue Anyway' to pass the Microsoft Logotest. • Click 'Finish' to complete the installation of the USB to Serial cable. • Check the device manager to see if the Sitecom USB to Serial cable is installed correctly. The cable is installed under 'Ports'.
-
Page 11: Changing The Com Port
Changing the COM Port - Windows 98SE/ME • Go to the device manager, open Ports and select the USB to Serial cable. Click 'Properties'. • Go to the Resources tab, uncheck the 'Use automatic settings' checkbox and click 'Change Settings'. •... - Page 12 COM1 : 03F8-03FF COM2 : 02F8-02FF COM3 : 03E8-03EF COM4 : 02E8-02EF COM5 : 03D8-03DF COM6 : 02D8-02DF - Windows 2000/XP • Go to the device manager, open Ports and select the USB to Serial cable. Right mouse click the Cable and choose 'Properties'. •...
- Page 13 • Change the COM port Number and click 'OK', reboot the pc to finish.
Need help?
Do you have a question about the CN-104v2 and is the answer not in the manual?
Questions and answers