NTI LIP-9030 User Manual

User's Guide
This user's guide is to be used for
LIP-9020 & LIP-9030 IP Phones
Configured on UCP-100 System
For more info, contact us at:
Normandeau Technologies
INFO@NTILINK.COM
413.584.3131

MAKE AN OUTSIDE CALL

1) Lift handset and dial 9 for next available line then dial
number
2) Or press a LOOP button for outside dial tone then dial
number

ANSWER A CALL RINGING AT YOUR STATION

1) Lift handset or press SPEAKER button for hands free

ANSWER A CALL RINGING AT ANOTHER STATION

1) Lift handset or press PICKUP soft key button

TRANSFER CALL TO EXTENSION

1) While on Call press TRANSFER button
2) Dial the Station number or press pre-programmed flexible
button
3) Announce Call (supervised transfer only)
4) Hang up

TRANSFER CALL TO VOICEMAIL

1) While on Call press TRANSFER button
2) Press MESSAGE button
3) Dial the Station number or press pre-programmed flexible
button
4) Hang up

MAKE AN INTERCOM CALL

1) Lift handset or press SPEAKER button
2) Dial the Station number or press pre-programmed flexible
button

PLACE A CALL ON HOLD

Press the HOLD/SAVE button to retain call at your station

RETRIEVE CALL ON HOLD

Press flashing LOOP key on the phone to retrieve your held call

PARK A CALL (System wide hold for others to access call)

1) Press PARK key
2) OR Press TRANS/PGM button (or TRANS soft key) then dial
parking bin location number (#601~#610)
3) Hang up or press SPEAKER button

RETRIEVE PARKED CALL

1) Press flashing PARK button
2) OR Lift handset on any Station (or press SPEAKER button)
3) Dial Parking location number (#601~#610)

PAGE (ALL CALL)

1) Lift handset
2) Press Page to call all system phones and overhead speakers
w
ait for tone then speak
3) Hang up
-